Woodworking Clamp EPM E-400-0103 300 x 50 mm | bar clamp for holding workpieces

EPM woodworking clamp model E-400-0103 is a bar clamp with clamping dimensions 300 x 50 mm, designed to hold and secure workpieces during gluing, assembly or cutting. The clamp provides stable pressure for carpentry, joinery and DIY tasks, enabling accurate alignment and temporary fastening of wooden and panel materials in workshop and on-site environments.

Advantages

The EPM E-400-0103 features a durable bar and a jaw profile suited for consistent grip across the clamping surface. Its 300 x 50 mm clamping range gives sufficient reach and throat depth for small to medium-sized assemblies. The construction ensures even pressure distribution to reduce movement during glue setting or machining. The design balances holding force and ease of adjustment to simplify repetitive clamping tasks.

Suitable for

• Gluing and edge-banding of boards and panels
• Assembly of frames, cabinets and furniture parts
• Temporary fastening during cutting, sanding or routing
• On-site carpentry and workshop jigs

Key specifications

• Clamping capacity: 300 x 50 mm
• Tool type: bar clamp for holding workpieces
• Material compatibility: solid wood, plywood, MDF and laminated panels
• Pressure distribution: even jaw contact for stable clamping
• Adjustment: quick-positioning along the bar with screw or trigger mechanism depending on variant

How to use

Place the clamp so the jaws fully contact the workpiece surfaces to be secured, ensuring the load is centered on the clamping area. Adjust the movable jaw along the bar to close the gap and apply pressure until the pieces are held firmly but without crushing the material. For gluing operations, keep pressure steady until adhesive sets; for machining, verify the workpiece is immobile before starting tools. Release the clamp by reversing the adjustment mechanism and remove once the operation is complete.

Usage recommendations

To protect finished surfaces, use protective pads or scrap wood between the clamp jaws and the workpiece. Inspect the bar and jaws regularly for wear or debris that could affect grip, and avoid overtightening to prevent material damage. Store the clamp in a dry place to prolong service life.