Motion Detector Homematic IP HmIP-VDMOT

The Homematic IP Valve Drive – motorised controls the valve position to regulate heating water flow almost continuously, enabling more precise room temperature control and more efficient boiler operation than conventional radiator thermostats. The drive uses proven modern motor technology, automatically detects valve position and travel depending on valve type for easy and error‑free installation, and can be mounted in any orientation thanks to its compact design. It is compatible with valves from many common manufacturers with an M30 x 1.5 mm thread and can be adapted to other valve sizes using optional adapters. The valve drive is intended for use with Homematic IP control solutions such as the Homematic IP Floor Heating Actuator – 12 channels, motorised (HmIP-FALMOT-C12), a Homematic IP Access Point with smartphone app, a CCU2/CCU3 central unit, or third‑party partner systems.

Advantages

The motorised valve drive provides near‑continuous flow control for finer temperature regulation and improved boiler workload management compared with conventional thermostats. Its modern drive technology is field‑proven in millions of radiator devices, and automatic valve position and travel detection simplifies installation and reduces configuration errors. Snap‑on fastenings permit tool‑free mounting, and the compact housing allows installation in any position. Broad compatibility with common valve manufacturers and availability of adapters extend its usability across many heating systems.

Suitable for

• Motorised control of radiator and underfloor heating valves with M30 x 1.5 mm thread
• Integration with Homematic IP Floor Heating Actuator (HmIP-FALMOT-C12) and Homematic IP thermostats
• Use in smart home setups via Homematic IP Access Point, CCU2/CCU3, or compatible third‑party controllers

Key specifications

• Compatibility: Valves with thread M30 x 1.5 mm (adapters available for other sizes)
• Mounting: Snap‑on, tool‑free; installation in any orientation
• Drive type: Motorised valve drive with automatic valve position and travel detection (dependent on valve type)
• Integration: Works with Homematic IP Floor Heating Actuator – 12 channels, motorised (HmIP-FALMOT-C12) and Homematic IP thermostats; also usable with Homematic IP Access Point, CCU2/CCU3 or partner solutions

How to use

Attach the valve drive to a compatible valve by snapping it into place; no tools are required. When installed, the unit will automatically detect valve position and travel where supported by the valve type. Operate and configure the valve drive either directly via a compatible wall thermostat in conjunction with the Homematic IP Floor Heating Actuator – 12 channels (stand‑alone mode), or through a Homematic IP Access Point with the smartphone app, a CCU2/CCU3 central unit using the WebUI, or supported third‑party systems.

Usage recommendations

For reliable operation, confirm valve compatibility (M30 x 1.5 mm) before installation and use optional adapters when required. Install the drive according to manufacturer guidance and integrate it with a supported Homematic IP controller or partner system for full feature access.