Active Optical HDMI 2.0 Cable EQUIP 440732 AM–AM, 50 m, 4K/60Hz, gold-plated contacts, black

The EQUIP Active Optical HDMI 2.0 Cable (model 440732) is a hybrid HDMI A-to-A lead that combines optical fibre and copper conductors to extend HDMI signals over long distances without signal loss or added latency. This single-direction AOC carries high-speed TMDS video over multimode optical fibre while low-frequency control and power signals travel via copper wires. The 50 m cable supports up to 4K/60Hz and is supplied with gold-plated HDMI Type A male connectors in a black zinc-alloy housing for robust physical connection.

Advantages

Using optical transmission for high-speed video channels eliminates the attenuation and interference typical of long copper runs, allowing reliable HDMI extension up to 50 metres with no external power required. The hybrid design preserves control and Ethernet channels over copper, and gold-plated contacts improve contact reliability and reduce corrosion. The cable supports HDMI 2.0 features such as HDR, HDCP 2.2 and 3D.

Suitable for

• AV installations in conference rooms and lecture theatres
• Digital signage and video walls requiring long cable runs
• Home theatre systems where a long HDMI run is needed
• Professional setups that require reliable 4K/60Hz transmission

When it may not be suitable

This cable is single-directional (source → display) and will not transmit signals in reverse. It is therefore unsuitable where bidirectional HDMI communication is required or where the cable orientation cannot be guaranteed. Also, while the cable supports HDMI 2.0 bandwidth (up to 18 Gbps), it does not provide HDMI 2.1 features such as higher frame rates or eARC.

Key specifications

• Cable type: Active Optical Cable (hybrid optical fibre and copper)
• Length: 50 m
• Connectors: HDMI Type A male to HDMI Type A male
• HDMI version: 2.0
• Maximum bandwidth: up to 18 Gbps
• Maximum supported resolution: 4K (3840 × 2160) @ 60 Hz
• Additional supported modes: 2K (2560 × 1440) @ 144 Hz; 1080P (1920 × 1200) @ up to 240 Hz
• Supports: 3D, HDCP 2.2, HDR, HDMI Ethernet Channel (HEC)
• Housing: zinc alloy; colour: black
• Contacts: gold plated
• Weight: approx. 1.46 kg

How to use

Connect the cable only in the correct orientation: the source end must be plugged into the video source (for example a Blu-ray player, media player or PC) and the display end into the monitor, TV or projector. Ensure HDMI connectors are inserted fully and avoid sharp bends near the connector heads. No external power supply is required; the cable carries necessary low-frequency control signals over its copper conductors. Verify display and source settings to match 4K/60Hz where applicable.

What to consider before purchase

• Confirm that you require a single-direction AOC (source → display) and can orient the cable correctly
• Check that HDMI 2.0 feature set and 18 Gbps bandwidth meet your resolution and refresh rate needs
• Ensure device compatibility with HDCP 2.2 and HDR if those features are needed
• Account for the 50 m length and routing constraints; avoid tight bends and extreme cable stress

Usage recommendations

Use this EQUIP Active Optical HDMI 2.0 cable for fixed installations where a reliable, long-distance 4K/60Hz HDMI link is required. Install with gentle cable bends, confirm correct source-to-display orientation, and set source/display video modes to the desired resolution and refresh rate.