EQUIP HDMI 2.0 Active Optical Cable M/M 70 m, HDMI Type A to Type A, 18 Gbit/s, 4K@60Hz, ARC, 3D, Black

The EQUIP HDMI 2.0 Active Optical Cable M/M 70 m is a hybrid HDMI Type A to Type A cable designed to transmit high-definition video and audio over long distances. It carries high-speed TMDS signals over multimode optical fibres while low-frequency control and power-related signals travel via copper conductors, allowing reliable 4K@60Hz transmission up to 70 m without signal degradation or an external power supply. The cable has a black jacket and zinc-alloy connector housings.

Advantages

This active optical cable combines optical fibre and copper to extend HDMI signals with minimal latency and without loss of quality over long runs. It supports HDMI 2.0 bandwidths up to 18 Gbit/s, 4K@60Hz video, 3D formats, HDCP2.2, Audio Return Channel (ARC) and the HDMI Ethernet Channel, making it suitable for AV systems that require both video fidelity and control-channel compatibility. The integrated design removes the need for separate signal boosters or power injectors.

Suitable for

• Connecting TVs and projectors to AV receivers or source devices over long distances (up to 70 m)
• Large meeting rooms, auditoriums or home cinema installations where wall runs or ceiling routes exceed standard copper HDMI limits
• Setups requiring 4K@60Hz video, 3D support or ARC functionality

When it may not be suitable

This cable is designed for long-distance HDMI links and may be unnecessary for short runs where a passive copper HDMI cable offers a simpler and lower-cost solution. It is not intended to provide more than the specified 18 Gbit/s bandwidth and HDMI 2.0 feature set, so it does not support newer HDMI 2.1 features such as higher bandwidths or variable refresh rate modes introduced in later HDMI versions.

Key specifications

• Cable length: 70 m
• Connectors: HDMI Type A (Standard) male to HDMI Type A (Standard) male
• HDMI version compatibility: HDMI 2.0
• Maximum bandwidth: 18 Gbit/s
• Maximum video resolution: up to 4K@60Hz
• Supported features: 3D, HDCP 2.2, Audio Return Channel (ARC), HDMI Ethernet Channel (HEC)
• Construction: hybrid optical fibre and copper conductors
• Housing material: zinc alloy
• Color: black

How to use

Connect the male HDMI Type A plug on one end of the cable to the HDMI output of your source device and the male HDMI Type A plug on the other end to the HDMI input of the display or AV receiver. Ensure both devices support the desired HDMI 2.0 features (for example, 4K@60Hz and ARC). Route the cable along the desired path; the active optical segment handles long runs without external power. If image or sound settings need adjustment, configure the source and display devices according to their menus (resolution, HDR, audio output settings, etc.).

What to consider before purchase

• Confirm that both source and display devices support HDMI 2.0 features you need (4K@60Hz, ARC, HDCP 2.2)
• Check that a 70 m run fits your installation path and mounting requirements
• Ensure in-wall or conduit installation rules in your region allow active optical cables and the cable diameter fits your routing

Usage recommendations

For best results, avoid sharp bends or kinks in the cable and secure it to prevent strain on the connectors. Verify device settings for resolution and audio formats after connection and test the full run before final installation to confirm stable 4K@60Hz performance.