EQUIP HDMI 2.0 Active Optical Cable AM–AM, 100 m, HDMI Type A male–male, gold-plated contacts, 4K/60Hz support

The EQUIP HDMI 2.0 Active Optical Cable (AOC) is a hybrid HDMI Type A male–male cable that uses optical fibre for high-speed video transmission and copper conductors for control signals. It extends HDMI signals up to 100 m while maintaining full HDMI 2.0 performance, including 4K/60Hz, HDR, 3D and HDCP 2.2 support, without requiring an external power supply.

Advantages

The cable delivers lossless, low-latency transmission over long distances by carrying TMDS video data through multimode optical fibres and low-frequency control channels via copper wires. It supports bandwidths up to 18 Gbps, HDMI Ethernet Channel and gold-plated connectors in a zinc-alloy housing for reliable contact and mechanical durability. The design is suitable for installations that need a single-cable solution for signal and control across extended runs.

Suitable for

• Connecting displays, TVs or projectors to AV sources in large rooms or venues
• Digital signage and presentation systems requiring long cable runs
• Home cinema or professional installations needing 4K/60Hz and HDR over distance
• Setups where cable weight and shielding are preferred over many active extenders

When it may not be suitable

This AOC is unidirectional and transmits only from source to display; it must be connected following the cable’s marked direction. It is not suitable where bidirectional HDMI features that require signal return on the opposite conductor are needed, or for installations that require reversible or two-way HDMI connections.

Key specifications

• Cable type: Active Optical Cable (hybrid optical fibre and copper)
• Length: 100 m
• Connectors: HDMI Type A (Standard) male — both ends
• HDMI version: 2.0
• Maximum resolution: 4K@60Hz
• Bandwidth: up to 18 Gbps
• Features supported: HDR, 3D, HDCP 2.2, HDMI Ethernet Channel
• Directionality: unidirectional (source → display)
• Colour: Black
• Housing: zinc alloy; contacts: gold-plated
• Approximate weight: 2.95 kg

How to use

Check the cable’s direction marking and connect the end labelled “Source” to the HDMI output of your player, PC, or AV transmitter, and the end labelled “Display” to the HDMI input of your monitor, TV, or projector. Ensure both devices support the desired resolution and HDCP version. Route the cable avoiding sharp bends and excessive tension; optical fibres require gentle handling compared with standard copper-only HDMI cables. No external power supply is required.

What to consider before purchase

• Confirm the need for a unidirectional cable and that source and display are correctly identified
• Verify that connected devices support HDMI 2.0, 4K/60Hz and HDCP 2.2 if those features are required
• Plan cable routing to avoid tight bends and mechanical stress on the cable
• Consider the cable weight and support requirements for long runs

Usage recommendations

For reliable performance, install the cable with gentle curvature (no sharp bends), secure supports along the run to prevent strain, and connect in the correct direction from source to display. Test the AV chain at the desired resolution before final installation.