Ring Terminal Ergom KM 16/10 copper | model E11KM-01010103100

Ring terminal Ergom KM 16/10 copper is a crimp-style electrical connector designed for terminating cables with a 16 mm² conductor cross-section and fitting bolts or studs with a 10 mm internal ring diameter. Manufactured from copper, this terminal provides low electrical resistance and durable mechanical connection when properly crimped to the matching conductor. It is intended for use in electrical installations, control panels, battery connections and grounding systems where a secure bolted joint is required.

Advantages

The copper construction ensures good conductivity and corrosion resistance in typical indoor and sheltered environments. Its ring design offers positive mechanical fixation for bolted joints, reducing the risk of loosening under vibration. The terminal is compatible with standard crimping tools and dies for the stated conductor size, allowing consistent and repeatable connections when installed according to best practices.

Suitable for

• Electrical installations and distribution blocks
• Control panels and switchgear terminations
• Battery terminals and power distribution connections
• Protective grounding and earthing systems

Key specifications

• Material: copper
• Conductor cross-section: 16 mm²
• Ring internal diameter: 10 mm
• Connector type: ring (crimp) terminal
• Suitable for bolted/stud connections

How to use

Select a cable with the specified 16 mm² conductor cross-section and strip the insulation to the appropriate length for complete insertion into the terminal barrel. Place the conductor into the barrel so all strands are contained, then use a compatible crimping tool and die rated for 16 mm² copper conductors to form a secure crimp. After crimping, inspect the connection for tightness and proper deformation. Fit the ring over the bolt or stud and secure with an appropriate nut and washer, applying the torque recommended for the bolt size and application.

Usage recommendations

Use the terminal only with conductors of the specified cross-section and with suitable crimping equipment. For outdoor or harsh environments consider additional corrosion protection or insulated variants appropriate for the application. Verify torque values for bolted connections in accordance with relevant installation standards and manufacturer guidelines.