Copper tinned ring terminal Ergom KOR 95/10 (E11KM-01020106000) — ring lug for crimping, 95 mm² cable, 10 mm bolt hole

Ring terminal Ergom KOR 95/10 is a tinned copper ring lug made for crimp termination of large conductors. Designed to accept 95 mm² cable and to be fastened with a 10 mm bolt, this lug delivers a solid electrical and mechanical connection for power distribution, grounding and battery terminals. The tin plating increases corrosion resistance and enhances solderability, while the robust barrel is suitable for use with compatible hydraulic or mechanical crimping tools. The product is intended for installation where durable low-resistance joints are required in industrial, automotive or renewable energy systems.

Advantages

The tinned copper construction combines the conductivity of copper with a protective tin coating that reduces oxidation and extends service life in exposed environments. The 10 mm bolt hole and roomy barrel are sized to accommodate 95 mm² conductors, providing consistent mechanical retention after a proper crimp. The lug’s geometry supports reliable current transfer and simple mechanical attachment to busbars, battery posts or grounding points. Compatibility with insulating sleeves or heat-shrink tubing allows additional strain relief and environmental protection where needed.

Suitable for (tasks / use cases)

• Crimp termination of 95 mm² copper conductors
• Battery connection and power distribution in vehicles and stationary systems
• Grounding and earthing points in electrical installations
• Industrial switchgear, busbars, and junction connections

When it may not be suitable

This ring terminal is not suitable for conductors significantly smaller or larger than 95 mm²; using it with an incorrect conductor size can produce poor electrical contact or an unreliable crimp. It is not intended for direct connection to components that require insulated or quick-disconnect terminals without additional protective measures. For applications exposed to aggressive chemicals or seawater, further protective measures or alternative materials may be required despite the tin plating.

Key specifications

• Material: copper with tin plating
• Conductor cross-section: 95 mm²
• Bolt hole diameter: 10 mm
• Connection type: crimp barrel with ring lug
• Typical applications: power, grounding, battery terminals

How to use

Strip the conductor to the correct length specified for the lug barrel, insert the conductor fully into the barrel, and perform a crimp using a suitable crimping tool sized for 95 mm² terminals. Inspect the crimp for secure mechanical retention and low movement of strands. Fit an insulating sleeve or apply heat-shrink tubing if additional strain relief or environmental protection is required. Mount the lug onto the mating stud or bolt and tighten to the torque recommended for the connection hardware and conductor size.

What to consider before purchase

• Verify conductor cross-section to ensure compatibility with 95 mm²
• Confirm bolt/stud diameter of the mating terminal is 10 mm
• Ensure you have a compatible crimping tool or crimping die for 95 mm² lugs
• Decide if additional insulation or corrosion protection (heat-shrink tubing) is required

Usage recommendations

Use with proper crimping equipment and follow recommended torque values for the bolt connection. If exposed to outdoor or corrosive environments, add heat-shrink or appropriate sealing to extend service life. Periodically inspect connections for tightness and signs of corrosion or overheating.