Leave your address - as soon as the price of the product goes down, you'll know about it right away
Ring Terminal Ergom 2KAM 35/8 aluminium crimp connector E12KA-01050100900
Ring Terminal Ergom 2KAM 35/8 aluminium crimp connector E12KA-01050100900
In cart {{totalProductsCount}} item(s)
Your cart is empty
Ring Terminal Ergom 2KAM 35/8 aluminium crimp connector E12KA-01050100900
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Ring Terminal Ergom 2KAM 35/8 aluminium crimp connector E12KA-01050100900
Ring Terminal Ergom 2KAM 35/8 aluminium crimp connector E12KA-01050100900
Ergom ring terminal 2KAM 35/8 is an aluminium crimp connector intended for making reliable electrical connections to stud or bolt terminals. Designed to accept conductors with a 35 mm² cross-section and to fit an 8 mm stud diameter, this aluminium terminal provides a corrosion-resistant conductive path for power distribution, grounding and industrial electrical installations. The connector uses a crimp-style attachment to secure the conductor, ensuring mechanical stability and low electrical resistance when installed with an appropriate crimping tool.
The aluminium construction offers resistance to corrosion while remaining lightweight compared with copper terminals. The crimp-style attachment produces a strong mechanical and electrical joint when properly compressed, reducing the risk of loose connections under vibration. The ring design ensures a reliable contact surface to stud or bolt terminals and allows for simple installation and inspection of the connection.
Strip the conductor insulation to the recommended length for the terminal barrel and insert the bare conductor fully into the crimp barrel. Use an appropriate crimping tool sized for 35 mm² aluminium terminals to apply a controlled compression force, producing a secure mechanical and electrical joint. Place the ring over the 8 mm stud or bolt, and secure it with the correct nut and washer torque as specified for the application. After installation, visually inspect the crimp and the mounting to confirm secure contact and absence of loose strands.
Use a crimping tool certified for aluminium terminals and follow recommended torque values for the stud or bolt. Where dissimilar metals are present, apply suitable anti-oxidation compound or use compatible transition connectors to prevent galvanic corrosion. Verify that the terminal is appropriate for the application's current rating and environmental conditions.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}