Ergom aluminum ring terminal 2KAM 95/10 (E12KA-01050102500) for cable termination

Ergom aluminum ring terminal 2KAM 95/10 (E12KA-01050102500) is a crimp-style cable lug made from conductive aluminum alloy for reliable cable termination. It is designed to connect a 95 mm² conductor to a bolt or stud with a 10 mm hole, providing a secure mechanical and electrical joint for power distribution, grounding, and industrial electrical installations. The lug’s shape and material offer good conductivity and corrosion resistance where aluminum terminations are required.

Advantages

The aluminum construction reduces weight while maintaining electrical conductivity suitable for medium- to high-current circuits. The crimp-style barrel ensures consistent mechanical retention and low contact resistance when installed with the correct crimping tool and dies. The ring design with a 10 mm bore provides stable fixation on bolts or studs commonly used in switchgear, busbars, and grounding points. The product is compatible with standard crimping procedures for aluminum conductors.

Suitable for

• Power distribution panels and busbar connections
• Grounding and earthing systems
• Industrial electrical installations and switchgear
• Connections to studs and terminal blocks with 10 mm bolts

Key specifications

• Material: aluminum conductive alloy
• Conductor capacity: for 95 mm² cable cross-section
• Bolt hole diameter: 10 mm
• Connection type: crimp barrel with ring terminal
• Recommended application: power and grounding terminations

How to use

Select a matching 95 mm² aluminum conductor and prepare the cable end by stripping the insulation to the appropriate length for the crimp barrel. Insert the conductor fully into the barrel and use a suitable crimping tool and die set rated for 95 mm² aluminum lugs to compress the barrel uniformly. After crimping, inspect the connection visually and, if applicable, perform a pull test or measure contact resistance. Secure the ring over a 10 mm bolt or stud and tighten the fastener to the equipment manufacturer’s recommended torque. Where required, apply appropriate anti-oxidation compound compatible with aluminum joints.

Usage recommendations

Use tooling and dies specified for aluminum crimp terminals and follow manufacturer torque values for bolted connections; for critical or high-current installations, verify connections with a qualified technician and consider protective measures against galvanic corrosion when joining dissimilar metals.