Filament spool, eSun ABS+ 1.75 mm, 1 kg, Orange

eSun ABS+ 1.75 mm filament in orange is a 1 kg spool of ABSplus material designed for FDM/FFF 3D printers. The filament has a nominal diameter of 1.75 mm and is intended for general-purpose prototyping, functional parts and post-processed models that require improved toughness and heat resistance. eSun ABS+ delivers higher impact resistance and reduced warping compared with standard ABS, while producing relatively low odor and lower VOC emissions during printing.

Advantages

eSun ABS+ combines enhanced mechanical strength and impact resistance with lower shrinkage and reduced tendency to warp and crack in the printing process. The material produces less odor and volatile emissions than conventional ABS, enabling more comfortable printing sessions. The spool format provides 1 kg of continuous filament suitable for medium-size prints and iterative prototyping.

Suitable for

• Functional prototypes and mechanical parts requiring toughness
• Enclosures, brackets and fixtures exposed to moderate heat
• Post-processed models that will be sanded, painted or acetone-smoothed
• General-purpose prints where dimensional stability is important

Key specifications

• Material: ABSplus
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg
• Colour: Orange
• Recommended print speed: up to 100 mm/s (depends on printer and part geometry)
• Attributes: high toughness, high impact resistance, low shrinkage, low odor

How to use

Load the 1.75 mm filament into an FDM/FFF printer compatible with ABS-type materials. Use a heated bed and consider an enclosure to maintain ambient temperature for larger or more detailed parts. Typical extrusion temperatures for ABSplus will vary by printer; start with the manufacturer's recommended temperature range for ABSplus and adjust in small increments to optimize layer adhesion and surface finish. Calibrate extrusion and bed level before printing and ensure spool runs freely to avoid under-extrusion.

Usage recommendations

For best results, print on a heated bed with adhesion aids (glass with adhesive, PEI sheet or ABS slurry). If warping appears, reduce cooling fan speeds and use a printer enclosure. Allow parts to cool slowly in the enclosure. For smoother surfaces, post-process with sanding, filling or controlled acetone vapor smoothing where appropriate and safe.