Filament spool eSun ABSplus Red 1 kg, 1.75 mm, ABS+ material

eSun ABSplus Red 1 kg is a 1.75 mm filament spool designed for FDM/FFF 3D printing. Made from ABSplus material and supplied in red, this 1 kg roll is intended for prototyping and producing functional parts that require greater toughness and thermal resistance than typical PLA filaments. The material offers high impact resistance and reduced tendency to warp or crack during printing, while emitting low levels of volatile organic compounds and low odor.

Advantages

ABSplus provides higher mechanical strength and heat resistance compared with standard PLA, making it suitable for load-bearing and mechanically stressed parts. The filament is formulated for low VOC content and low odor during extrusion, and its low shrinkage improves dimensional stability and reduces warping and cracking. The 1.75 mm diameter and 1 kg spool format are compatible with the majority of hobbyist and professional FDM printers.

Suitable for

• Prototyping mechanical components and functional models
• Automotive and appliance enclosures or fittings
• Durable parts that require impact resistance
• Structural models and fixtures exposed to moderate heat

Key specifications

• Material: ABSplus
• Filament diameter: 1.75 mm
• Spool weight: 1 kg
• Color: Red
• Characteristics: high toughness, high impact resistance, low shrinkage
• Printing speed reference: up to 100 mm/s (printer-dependent)

How to use

Load the 1.75 mm filament into a compatible FDM/FFF printer following the printer manufacturer's filament loading procedure. Recommended print settings vary by machine and model: a heated bed and enclosed build chamber are advisable to reduce warping and improve layer adhesion. Adjust nozzle temperature and bed temperature according to your printer and part geometry; perform a test print to fine-tune extrusion multiplier and retraction to minimize stringing and ensure dimensional accuracy.

Usage recommendations

For best results, print ABSplus on a heated bed at an appropriate temperature and consider using an enclosure to maintain ambient temperature. Use adhesives or a proper build surface to improve first-layer adhesion. Allow parts to cool gradually to reduce internal stresses. Store the filament in a dry environment or sealed bag with desiccant to preserve filament quality.