3D printer filament eSun ABS+ Silver 1 kg, 1.75 mm

eSun ABS+ Silver is a 1.75 mm filament supplied on a 1 kg spool, formulated from ABSplus material for FDM/FFF 3D printers that accept ABS variants. The silver-coloured filament is intended for general-purpose functional parts where toughness, impact resistance and reliable layer adhesion are required. The material combines improved dimensional stability with reduced odor and lower VOC emissions compared with conventional ABS grades, and is suitable for prototypes, housings and mechanical components printed at common desktop printer settings.

Advantages

ABS+ Silver provides high toughness and elevated impact resistance for durable printed parts. The formulation reduces shrinkage and lowers the risk of warping and cracking during printing, while emitting less odor and volatile compounds than typical ABS. Layer adhesion is enhanced to improve strength of multi-layer parts, and the silver colour gives a neutral metallic appearance without post-processing.

Suitable for

• Functional prototypes and proof-of-concept parts
• Enclosures, housings and mounting brackets
• Mechanical components and fixtures requiring impact resistance
• Parts needing good layer adhesion and dimensional stability

Key specifications

• Material: ABSplus
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: Silver
• Recommended print speed: up to 100 mm/s

How to use

Load the 1.75 mm filament into an FDM/FFF printer configured for ABS-like materials. Use a heated build platform; typical nozzle temperatures and bed temperatures should follow your printer manufacturer's ABS guidance and previous experience with ABSplus materials. Print with adequate part cooling turned off or low to promote layer bonding. Ensure good bed adhesion using a suitable build surface or adhesive aid and allow controlled cooling to minimise residual stress and warping.

Usage recommendations

For best results, print on a heated bed and use an enclosed or draft-free environment. If needed, apply a brim or raft for larger flat areas to reduce warping. Calibrate extrusion and first-layer height before longer prints. Post-processing such as sanding or acetone smoothing can improve surface finish; perform such treatments following safety guidelines for ABS-based materials.