Filament spool eSun EPLA-LITE 1.75 mm, 1 kg, green (PLA-Lite)

eSun EPLA-LITE 1.75 mm is a 1 kg spool of green PLA-Lite filament formulated for FDM/FFF desktop 3D printers that accept 1.75 mm filament. The material offers the familiar handling characteristics of PLA with reduced brittleness and reliable dimensional stability, making it suitable for a wide range of general-purpose prints such as prototypes, visual models and decorative parts. The filament is provided on a standard spool compatible with most consumer and prosumer printers and is intended for users who prioritize ease of printing and predictable results.

Advantages

The filament provides consistent extrusion and layer adhesion typical of PLA-based materials while offering improved toughness compared with standard PLA. Low warp tendency and good dimensional stability reduce failed prints and post-processing effort. Its green color is evenly distributed along the spool for uniform appearance in visible parts. The material prints on a wide range of temperatures and settings used for PLA, enabling quick setup on most desktop printers.

Suitable for

• Concept prototypes and visual mock-ups
• Decorative objects and display pieces
• Low-stress functional parts and jigs
• Educational projects and hobbyist models

Key specifications

• Filament diameter: 1.75 mm
• Spool weight: 1 kg net filament
• Material type: PLA-Lite (PLA-based)
• Color: green
• Compatibility: FDM/FFF desktop 3D printers accepting 1.75 mm filament
• Printing behavior: low warp, good layer adhesion, improved toughness versus standard PLA

How to use

Load the filament into a compatible 1.75 mm FDM/FFF printer following the printer manufacturer's instructions. Typical print settings are the same as for PLA: select an appropriate nozzle temperature for your machine and layer height, enable a heated bed if available (or use a build surface suitable for PLA), and use moderate print speeds to achieve consistent extrusion. Store the filament in a dry environment or sealed container with desiccant when not in use to maintain print quality.

Usage recommendations

For best results, start with standard PLA temperature ranges recommended for your printer and adjust by 5–10°C if necessary to improve flow or adhesion. Use a brim or raft for small bases if additional bed adhesion is needed. Dry the filament before printing if you observe increased brittleness or bubbling during extrusion.