3D Printing Filament eSun EPLA-SILK MAGIC 1.75 mm 1 kg — Green Blue (silk PLA blend)

EPLA-SILK MAGIC by eSun is a 1.75 mm, 1 kg silk-finish PLA blend designed for FDM/FFF 3D printers that accept 1.75 mm filament. This Green Blue silk PLA combines the dimensional stability and ease of printing typical for PLA with a satin, glossy surface that produces a shimmering, decorative look. The material is formulated to provide reliable extrusion, good layer adhesion and an attractive finish for visible parts and models without requiring extensive post-processing.

Advantages

The silk PLA blend offers a smooth, reflective surface that enhances the visual appearance of prints while maintaining PLA-like printing behavior. It prints at typical PLA temperature ranges and provides consistent flow and bridging performance for small to medium-sized models. The filament is supplied on a 1 kg spool with a 1.75 mm diameter that is compatible with a wide range of hobby and prosumer FDM/FFF printers.

Suitable for

• Decorative parts and display models
• Prototypes that require an attractive surface finish
• Miniatures and figurines
• Consumer models and household items with visible surfaces

Key specifications

• Material: silk-finish PLA blend
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Color: Green Blue (silk, satin gloss)
• Typical printing behavior: good layer adhesion, consistent extrusion

How to use

Load the filament into any FDM/FFF printer compatible with 1.75 mm filament. Use printing temperatures commonly recommended for PLA blends; start with the manufacturer's suggested range for silk PLA (typical PLA temperatures apply) and adjust in 5 °C increments to optimise layer bonding and surface gloss. Print with standard cooling settings for PLA to preserve the silk finish. Use appropriate bed adhesion methods such as blue tape, glue stick or a heated bed if required for your printer setup.

Usage recommendations

For best results, print at moderate speeds to allow uniform extrusion and to enhance the satin appearance. Calibrate nozzle temperature and cooling to balance layer adhesion and surface sheen. Store the filament in a dry place or sealed container with desiccant to maintain print quality over time.