3D Printer Filament eSun PLA+ 1.75mm Pine Green 1kg

eSun PLA+ 1.75mm Pine Green 1kg is a PLA+ thermoplastic filament for FDM/FFF 3D printers, supplied on a 1 kg spool. The 1.75 mm diameter is compatible with a wide range of desktop printers and is intended to provide steady feeding and consistent extrusion. PLA+ formulation improves impact resistance and reduces brittleness compared with standard PLA while retaining ease of printing, making it suitable for visual prototypes, display models and everyday printed parts in a pine green color.

Advantages

The PLA+ variant combines the printability of standard PLA with enhanced toughness and reduced tendency to snap, allowing for more durable prints without a major increase in printing difficulty. The 1.75 mm diameter is a common standard that provides reliable filament feeding and lower risk of jams on compatible extruders. The 1 kg spool size offers a balance between volume for several projects and manageable spool handling and storage.

Suitable for

• Visual prototypes and concept models where color and surface finish are important
• Household parts and functional components with moderate mechanical demands
• Decorative items, toys and display pieces in pine green
• Hobbyist and educational 3D printing projects requiring ease of use

When it may not be suitable

This filament is not formulated for high-temperature applications or continuous outdoor exposure where UV and weathering resistance are critical. For parts requiring very high heat resistance, chemical resistance, or industrial-grade mechanical properties, alternative engineering filaments such as ABS, PETG, nylon or specialty materials may be more appropriate. Extremely fine-detail micro-printing or very large structural parts may require different material choices or printer setups.

Key specifications

• Material type: PLA+ (improved polylactic acid)
• Diameter: 1.75 mm nominal
• Net spool weight: 1 kg
• Color: pine green
• Typical printing temperature range: consistent with PLA/PLA+ materials (refer to printer and filament guidance)
• Compatibility: FDM/FFF desktop 3D printers supporting 1.75 mm filament

How to use

Load the filament into a compatible 1.75 mm extruder following your printer manufacturer’s instructions. Set the hotend temperature consistent with PLA+ recommendations for your printer (start near standard PLA settings and adjust as needed for layer adhesion and surface finish). Use a heated bed if available to reduce warping, but PLA+ often prints well on unheated beds with proper adhesion aids. Monitor the first layers to confirm correct extrusion and bed adhesion, and adjust retraction and cooling settings to reduce stringing and improve detail.

What to consider before purchase

• Confirm your printer supports 1.75 mm filament and has appropriate nozzle/hotend settings for PLA+
• Check expected print temperature range for PLA+ compatible with your printer’s capabilities
• Consider spool storage to avoid moisture uptake; use sealed packaging or desiccant if storing long-term
• Ensure the pine green color matches your project requirements by testing a small sample print

Usage recommendations

For best results, print at moderate speeds with active part cooling for detailed surfaces, calibrate extrusion multiplier to ensure dimensional accuracy, and store the spool in a dry environment. Adjust retraction and temperature settings to minimize stringing while maintaining good layer adhesion.