Abrasive Mesh Sheets EUbridge SOFT Grit 40, 105x280 mm, Pack of 5

EUbridge SOFT abrasive mesh sheets, grit 40, size 105×280 mm, pack of 5 are open-mesh sanding sheets engineered for effective material removal on wood, painted surfaces, fillers and metal. The open structure reduces clogging by allowing dust to pass through the abrasive, improving dust extraction and maintaining cutting performance for longer compared with closed‑coated papers. These sheets are suitable for hand sanding and for orbital sanders or backings that accept mesh-format abrasives, providing a consistent aggressive cut while offering improved service life in dusty environments.

Advantages

The open mesh design minimizes clogging and supports faster dust extraction, which helps the abrasive stay sharp longer during continuous use. Grit 40 provides a coarse, aggressive cut for rapid stock removal and shaping. The 105×280 mm dimension fits common mesh-compatible sanding tools and hand-held applications, and the pack of five gives multiple replaceable sheets for professional or hobbyist workflows.

Suitable for

• Sanding and shaping rough wood and timber prior to finer grits
• Removing old paint, varnish or coatings from flat and contoured surfaces
• Leveling fillers and putty on repair areas
• Deburring and surface preparation of metal components
• Use with orbital sanders or by hand where mesh-format abrasives are accepted

When it may not be suitable

Because these sheets are coarse (grit 40), they are not intended for fine finishing or polishing steps; using them on delicate surfaces may leave deep scratches that require finer abrasives to remove. The open mesh construction is optimized for dust-generating tasks and may be unnecessary for minimal-dust jobs where closed-coat abrasive papers perform adequately.

Key specifications

• Abrasive type: open mesh (mesh abrasive)
• Grit: 40 (coarse)
• Sheet dimensions: approximately 105 × 280 mm
• Pack quantity: 5 sheets
• Recommended use: hand sanding and mesh-compatible orbital sanders

How to use

Select the grit 40 mesh sheet for initial stock removal or when rapid shaping is required. Attach the sheet to a compatible orbital sander or to a hand sanding block that accepts mesh-format abrasives; ensure secure mounting to avoid movement during sanding. Apply steady, even pressure and move across the workpiece in overlapping passes, allowing the abrasive and dust extraction to clear particles. Inspect the sheet regularly for wear or clogging and replace with a fresh sheet from the pack as needed. When transitioning to finer finish, progress through higher-numbered grits to remove scratches left by grit 40.

What to consider before purchase

• Confirm your sander or sanding block accepts mesh-format sheets of size 105×280 mm
• Choose grit 40 only when coarse material removal or heavy shaping is required
• Assess whether an open mesh abrasive is preferable for your dust extraction setup

Usage recommendations

For best results use these EUbridge SOFT 40-grit mesh sheets with a compatible dust extraction system or a sander that channels dust away from the work surface. Start with light test passes on a scrap piece to verify aggressiveness and avoid excessive material removal. Progress to finer grits for final smoothing and to achieve the desired surface finish.