Power cable EUROLITE IP T-Con 3x1.5 mm², 1.5 m, model 30235005

EUROLITE IP T-Con 3x1.5 mm², 1.5 m model 30235005 is a short mains power cable designed for supplying IP-rated lighting and control devices. With three conductors sized at 1.5 mm² and a total length of 1.5 metres, the cable provides live, neutral and earth connections in a compact, flexible lead intended for professional AV and lighting installations where a reliable short connection is required.

Advantages

The cable offers a compact and flexible design suitable for tight routing and short-distance power runs. Its 1.5 mm² conductor cross-section supports common lighting and control circuits while maintaining a slim profile for tidy installations. The construction is intended for use with IP-rated equipment and provides the three standard conductors needed for safe mains connection: live, neutral and earth. The short length reduces excess cabling and simplifies cable management in stage, studio and fixed installations.

Suitable for

• Connecting IP-rated stage and architectural lighting fixtures at short distances
• Powering control units and small distribution devices in AV racks
• Temporary or permanent short mains drops for stage and studio equipment
• Situations requiring a compact, flexible three-conductor lead with earth connection

Key specifications

• Conductor configuration: 3 cores (live, neutral, earth)
• Conductor cross-section: 1.5 mm² per core
• Cable length: 1.5 m
• Design: flexible mains cable for IP-rated equipment

How to use

Connect the cable to compatible IP-rated lighting fixtures or control devices following the equipment manufacturer’s wiring instructions. Ensure connections are made with power switched off and that all terminations are secure and insulated according to local electrical standards. Route the cable so it is protected from abrasion and mechanical strain, and avoid tight bends that could damage the conductors. For permanent installations, use appropriate glands or strain reliefs at enclosure entries to maintain IP integrity.

Usage recommendations

Verify that the 1.5 mm² conductor size and short 1.5 m length meet the current-carrying and voltage-drop requirements of your installation. Use the cable only with compatible IP-rated devices and install per local electrical codes; if unsure, consult a qualified electrician.