Power cable EUROLITE P-Con 3x1.5 mm², 3 m — EUROLITE 30247704

EUROLITE P-Con 3x1.5 mm² power cable, 3 m long, provides a flexible connection for lighting and audio devices equipped with P-Con connectors. The cable features three conductors with a 1.5 mm² cross-section, offering a common rated size for safe current transfer in stage, studio and fixed installations. Its 3 m length balances mobility and reach for typical equipment layouts while keeping cable management straightforward.

Advantages

The cable combines a standardized conductor size with a P-Con termination to ensure compatibility with a range of professional and semi-professional devices. Its 3 m length reduces the need for extensions in most setups and simplifies routing behind lighting rigs or audio racks. The conductor cross-section supports stable power delivery for fixtures and small to medium powered equipment, while the flexible outer sheath eases handling and coiling during transport and storage.

Suitable for

• Supplying power to stage and event lighting with P-Con connectors
• Connecting audio equipment and power distribution units in studios
• Temporary installations for rehearsals and live performances
• Fixed installations where a 3 m lead is required for routing

Key specifications

• Conductor configuration: 3 cores
• Conductor cross-section: 1.5 mm² per core
• Cable length: 3 m
• Connector type: P-Con compatible
• Sheath: flexible outer insulation suitable for frequent handling

How to use

Connect the P-Con plug to the corresponding socket on the lighting fixture, audio device or power distribution unit, ensuring the connector is fully seated and latched if applicable. Route the cable to avoid tight bends, sharp edges and high-traffic walkways; secure with appropriate cable ties or gaffer tape to prevent trip hazards. When disconnecting, grip the connector housing rather than pulling the cable to preserve the cable termination and internal conductors.

Usage recommendations

Use the cable within the rated load of connected equipment and avoid overloading circuits. Regularly inspect the sheath and connectors for wear, exposed conductors or damage before use. Store coiled without tight loops and keep dry to maintain performance and safety.