Cable conduit EUROLITE 51201112 yellow 10x10 mm, 2 m

EUROLITE 51201112 is a yellow cable conduit with a cross-section of 10×10 mm and a length of 2 m. It is designed to route and protect low-voltage cables and wires in installations where a compact, visible conduit is required. The conduit provides basic mechanical protection against abrasion and accidental contact while keeping cables organized and easy to trace in event setups, stage rigging and small installations.

Advantages

The yellow color improves visibility for quick identification of routed cables and reduces trip-hazard errors during installation and operation. With a narrow 10×10 mm profile and a 2 m length, the conduit is easy to handle, cut to size and mount in confined spaces. It enables orderly cable runs and contributes to tidier installations without adding significant bulk or weight.

Suitable for

• Event setups and temporary stage rigging
• Small electrical and low-voltage installations
• Cable organization in control cabinets or under desks
• Visible routing where color coding is beneficial

Key specifications

• Cross-section: 10 × 10 mm
• Length: 2 m
• Color: yellow
• Intended for: low-voltage cables and wires

How to use

Measure the required length and cut the conduit with an appropriate cutting tool. Route cables through the conduit, ensuring that conductors are suitable for the available internal space. Secure the conduit along the run using clamps, ties or mounting accessories compatible with the conduit profile. For installations in public or temporary environments, ensure connections and terminations remain accessible and that the conduit does not create undue strain on cable ends.

Usage recommendations

Use the conduit for organizing and protecting low-voltage wiring only; avoid running high-voltage or power cables unless product specifications explicitly permit. For permanent or load-bearing applications, verify mechanical protection requirements and choose an enclosure or conduit rated for the environment. Cut edges can be sharp—deburr after cutting and check that cables are not pinched when installing.