Video doorphone Evolveo EVOLVEO DoorPhone ID-1 — 2-wire intercom with RFID, fingerprint and ONVIF camera support

EVOLVEO DoorPhone ID-1 is a 2-wire video doorphone intended for controlled access and visitor identification at residential and small commercial entrances. The outdoor unit integrates a Full HD camera with a 170° wide-angle lens, an RFID reader and a capacitive fingerprint sensor. The indoor unit features a 7" color capacitive touchscreen monitor, local user and credential management, two relay outputs for controlling door and gate mechanisms, and network connectivity via WiFi (2.4 GHz) or LAN with Tuya Smart cloud support for remote call handling and management.

Advantages

The device offers convenient keyless entry through fingerprint and RFID authentication and stores biometric templates locally on the unit. A 2-wire installation simplifies replacement of older intercoms or installation during renovations by using a single cable pair for power and communication between the outdoor and indoor units. The Full HD camera with wide viewing angle and IR night vision enables clear visitor identification day and night and the indoor monitor supports recording to microSD for snapshots and video triggered by calls or motion. Two independent relay outputs allow simultaneous control of an entrance lock and a gate or garage door from the monitor, app or access credentials.

Suitable for

• Single-family homes and apartment entrances
• Small commercial premises with one or two access points
• Renovations where existing bell wiring is reused
• Properties requiring combined video monitoring and access control

Key specifications

• Outdoor camera: 2 MP CMOS, 1920 × 1080 px, 170° wide-angle, H.264 video
• Night vision: IR LED illumination, automatic switching, minimum illumination 0.1 Lux
• Access methods: capacitive fingerprint sensor (up to 100 templates) and 125 kHz RFID reader
• Indoor display: 7" TFT LCD capacitive touch, 1024 × 600 px, 16:9 aspect ratio
• Wiring: 2-wire non-polarized bus for power and communication; WiFi 2.4 GHz and RJ45 LAN on the monitor
• Relays: 2 independent outputs for door and gate control (potential-free relays, DC 12 V / max. 500 mA)
• Storage: microSD / TF support up to 128 GB for photo and video recording
• Operating conditions: –20 °C to +50 °C; outdoor unit IP65; indoor monitor wall-mounted
• Materials and dimensions: outdoor unit aluminum alloy 124 × 236 × 28 mm; indoor unit ABS 200 × 133 × 24 mm
• System capacity: up to 4 monitors, 2 outdoor units and 2 IP cameras; up to 20 shared users via app

How to use

Mount the outdoor panel either flush using the supplied installation box or surface-mounted with the compatible mounting box and connect the outdoor unit to the indoor monitor using the recommended 2-wire cable. Install the indoor monitor on the wall with the included bracket and connect the system power using the supplied 24 V DC adapter. Register user fingerprints and RFID chips directly on the outdoor unit or via the indoor monitor menu. Configure network access on the monitor using the built-in WiFi (2.4 GHz) or LAN port to enable Tuya Smart cloud features for remote answering, notifications and remote door/gate control. Insert a compatible microSD card to enable local recording and photo frame playback.

Usage recommendations

For reliable operation, use recommended 2-wire cable with conductor cross-section 0.75–1.0 mm2 and a stable 24 V DC adapter as supplied. Keep biometric templates and user lists updated regularly and deactivate lost RFID chips immediately. Configure WiFi on the indoor monitor using a 2.4 GHz network and maintain firmware updates via microSD card or LAN to ensure compatibility and security.