Optical Audio Cable Exertis Connect 987998, Toslink, 2.0 m

Optical Audio Cable Exertis Connect 987998, Toslink, 2.0 m is a 2.0 metre digital audio link designed for connecting TVs, soundbars, AV receivers and other devices that accept Toslink connectors. The cable transmits stereo and multichannel digital audio via light pulses, providing immunity to electromagnetic interference and ground loop hum. Its length and standard Toslink terminations make it suitable for typical home theater and AV installations where a compact, passive optical connection is required.

Advantages

The optical construction eliminates susceptibility to electrical noise and ensures a stable audio signal over the full 2.0 m length. Standard Toslink connectors provide broad compatibility with consumer AV equipment. The cable’s passive design requires no external power or drivers and maintains consistent timing for digital audio formats commonly used in TVs, soundbars and receivers.

Suitable for

• Connecting a TV to a soundbar for TV audio output
• Linking an AV receiver to optical inputs on source devices
• Home theater setups requiring a short optical connection
• Installations where electrical isolation from interference is needed

Key specifications

• Cable type: Optical (Toslink) digital audio cable
• Length: 2.0 metres
• Connector type: Standard Toslink plugs at both ends
• Supported signals: Stereo and multichannel digital audio (via standard Toslink formats)
• Construction: Passive optical fiber with protective jacket for indoor AV use

How to use

Insert each Toslink connector into the corresponding optical port on your TV, soundbar or AV receiver until it clicks into place. Ensure the optical ports are clean and free of dust before connection. Select the optical audio output on the source device and set the receiving device to the optical input. No configuration or drivers are required beyond selecting the correct input and audio format on connected equipment.

Usage recommendations

Avoid sharp bends or kinks in the cable; maintain gentle curves with a bend radius recommended for optical fiber to preserve signal integrity. Keep the cable away from direct sunlight and excessive heat sources. If audio dropouts occur, check connector seating and inspect the port faces for dust; clean with a dry, soft brush or compressed air if necessary.