Cooker hood extension tube FABER 112.0253.688 — 90° right-angle bend Ø150 mm, width 153 mm, height 184 mm

Extension tube FABER 112.0253.688 is a 90° right-angle bend designed for kitchen cooker hood ducting with a nominal diameter of 150 mm. The part provides a compact change of direction while maintaining a consistent internal diameter to ensure uninterrupted airflow. With an overall width of 153 mm and a height of 184 mm, the component is intended for use where space constraints or duct routing require a perpendicular turn in the exhaust path.

Advantages

This right-angle bend preserves the standard Ø150 mm duct profile to minimize flow losses and simplify connection to compatible cooker hood outlets and round ducting. The compact dimensions reduce the need for additional adapters in confined installations. Constructed to interface with standard circular ducts, it enables a secure mechanical fit and straight-forward alignment during installation.

Suitable for

• Redirecting cooker hood exhaust 90° where vertical or horizontal routing is needed
• Connecting FABER and other compatible Ø150 mm round duct systems
• Space-constrained kitchen installations requiring a compact bend
• Repair or replacement of existing right-angle duct sections in domestic ventilation

Key specifications

• Angle: 90° right-angle bend
• Nominal internal diameter: 150 mm
• Overall width: 153 mm
• Overall height: 184 mm
• Shape: circular cross-section, single-piece elbow

How to use

Align the Ø150 mm ends of the extension tube with the cooker hood outlet and the adjoining duct segment, ensuring both mating surfaces are clean and free of obstructions. Push the tube onto the duct ends or use the appropriate clamp or connector specified for the duct system to secure a tight mechanical joint. Confirm the elbow is oriented to achieve the required direction change and check for any gaps that could cause air leakage. After installation, run the hood briefly and inspect the connections for stable airflow and absence of rattling or vibrations.

Usage recommendations

For optimal performance, use this 90° elbow with Ø150 mm ductwork and secure all joints with suitable clamps or duct tape rated for ventilation systems. Avoid sharp creases or internal obstructions at the connection points, and allow access for periodic inspection and cleaning to prevent grease buildup. If multiple bends are required, consider the cumulative effect on airflow and consult ducting guidelines to minimize pressure loss.