Hand Tap Set FANAR M6 x 0.75 thread pitch — MPN A1-220001-0062

FANAR hand tap set for cutting internal metric threads M6 with 0.75 mm pitch. This compact kit is designed for manual threading operations in metals and other machinable materials. The set provides the taps required to form precise M6 x 0.75 internal threads using a tap wrench and suitable cutting lubricant. It is intended for repair, maintenance and small-scale fabrication tasks where accurate M6x0.75 threads are needed.

Advantages

The FANAR set offers a compact selection of taps optimized for producing consistent M6 x 0.75 threads. Taps in the set are sized and finished to provide reliable cutting performance in a variety of machinable metals and similar materials. The kit is suitable for manual use, allowing controlled feed and alignment with a standard tap wrench. Its focused specification reduces the chance of selecting incorrect thread tools when a specific M6 x 0.75 result is required.

Suitable for

• Repairing or re-threading internal M6 x 0.75 threads in machine parts and assemblies
• Maintenance tasks that require restoring worn or damaged M6 threads
• Small-scale fabrication and metalworking projects calling for precise M6x0.75 internal threads
• Workshop and field service operations where portable manual threading tools are needed

Key specifications

• Thread size: M6
• Thread pitch: 0.75 mm
• Tool type: hand taps for internal threads
• Hand use: intended for operation with a tap wrench (not powered)
• Material compatibility: suitable for machinable metals and comparable materials
• Package type: compact kit formatted for manual threading tasks

How to use

Select the appropriate tap from the set and secure the workpiece so it cannot move. Center the tap on the pilot hole sized for an M6 x 0.75 thread, apply an appropriate cutting lubricant, and start the tap with a tap wrench, keeping it square to the hole. Turn the tap forward a few turns, then reverse slightly to break chips and clear the flutes, repeating this cycle until the thread is cut to depth. Clean the tapped hole and inspect the thread for correct form and fit before assembly.

Usage recommendations

Use a drill size recommended for M6 x 0.75 pilot holes and apply a suitable cutting lubricant for the material being tapped. For hardened or difficult-to-machine alloys, reduce feed and increase chip-clearing frequency. Store taps clean and dry to prevent corrosion and inspect cutting edges before use to ensure accurate threading results.