Hand Tap Set FANAR M20 x 1.5 2 pcs (A1-220001-0205)

FANAR hand tap set M20 x 1.5, two-piece provides manual tapping tools for cutting internal metric threads with a 1.5 mm pitch and a nominal diameter of 20 mm. The set is intended for use with a tap wrench or holder and is suitable for general workshop threading tasks including repair, maintenance and light fabrication. The taps are designed for manual control and are practical for occasional and professional use where machine tapping is not available or appropriate.

Advantages

The two-piece configuration covers the typical thread start and finish stages: a taper or intermediate tap for initial entry and a second tap for finishing and achieving full thread depth. The hand taps are compatible with standard tap wrenches and holders, allowing straightforward installation and controlled cutting. Materials and geometry make the taps suitable for use in steel and non-ferrous metals, offering balance between cutting performance and tool life for manual operations.

Suitable for

• Cutting M20 x 1.5 internal metric threads by hand
• Repair and maintenance tasks on machinery and equipment
• Workshops performing manual threading on steel and non‑ferrous parts
• Prototype and small-scale fabrication requiring occasional taps

Key specifications

• Thread size: M20 x 1.5 (metric)
• Set composition: 2-piece hand taps (entry and finishing)
• Usage type: manual tapping with tap wrench or holder
• Suitable materials: steel and non-ferrous metals
• Application: internal thread cutting for repair, maintenance and fabrication

How to use

Select the appropriate tap from the two-piece set, secure the workpiece, and center the hole to match M20 x 1.5 thread size. Mount the tap in a suitable tap wrench or holder, apply cutting lubricant appropriate for the workpiece material, and start cutting with steady, straight pressure. For the initial pass use the entry tap to establish thread alignment, then switch to the finishing tap to complete the full thread profile. Periodically back the tap out to break chips and clear swarf, and reapply lubricant as needed to maintain cutting quality.

Использование – рекомендации

Use appropriate personal protective equipment, maintain correct alignment between tap and hole, and avoid excessive force to reduce risk of tap breakage. Clean and dry the taps after use and store them in a dry place to prevent corrosion. For hardened steels or high-volume production, consider machine taps or alternative tooling.