Hand Tap Set FANAR M27x1.5, 2 pcs (A1-220001-0275)

FANAR hand tap set for cutting internal threads with metric size M27x1.5. This two-piece set contains taps designed for manual use in metalworking and maintenance tasks. The taps are intended to create or repair standard M27x1.5 internal threads in components and assemblies where a precise metric thread is required.

Advantages

The set provides the basic tools needed for accurate manual tapping of M27x1.5 threads, reducing the need for individual tap purchases. Each tap is sized specifically for the M27x1.5 pitch, which helps ensure consistent thread geometry when used with appropriate tapping technique and lubrication. The two-piece configuration allows staged cutting to improve finish and reduce breakage risk during hand tapping operations.

Suitable for

• Repairing damaged M27x1.5 internal threads in machinery or assemblies
• Manually cutting new M27x1.5 internal threads in metal parts
• Maintenance work where on-site thread restoration is required

Key specifications

• Thread size: M27x1.5 (metric)
• Set composition: 2 taps for manual tapping
• Application: internal thread cutting in metalworking and maintenance

How to use

Secure the workpiece so it cannot move during tapping. Select the correct tap from the set and apply suitable cutting lubricant to the tap and hole. Start the tap perpendicular to the workpiece and turn it slowly by hand using an appropriate tap wrench, advancing a few turns then reversing slightly to break chips. Continue until the full thread depth is reached, then remove the tap while cleaning away any metal chips. If the set includes a progressive or second tap, use the first tap to form the thread and finish with the second for improved fit and surface quality.

Usage recommendations

Use appropriate personal protective equipment and cutting fluid for best results. Choose the correct tap wrench and maintain steady, straight alignment to reduce tap stress. For hard or tough materials, reduce feed and back out frequently to clear chips. Inspect tapped threads for proper engagement and clean chips from the hole before assembly.