Threading die FANAR Narzynka M14x1 — FANAR model FAN10143, metric M14×1 thread

Hand threading die FANAR Narzynka M14x1 (FANAR model FAN10143) is a compact tool for cutting or repairing external metric threads with a nominal diameter of M14 and a 1.0 mm pitch. Manufactured to fit standard die holders, this solid metal die is intended for manual thread cutting and rethreading on rods, shafts or similar cylindrical workpieces in workshops and maintenance environments.

Advantages

The die provides precise tooth geometry for accurate thread profile and consistent pitch. Its construction ensures stable cutting performance and durability during repeated use. Compatibility with common die holders and manual threading workflows makes it convenient for onsite repairs and routine metalworking tasks. The tool's compact size facilitates access to confined areas and simple storage in a toolbox.

Suitable for

• Cutting new external M14×1 threads on rods and shafts
• Repairing damaged or worn external M14×1 threads
• Field maintenance, workshop repairs and mechanical servicing
• Metalworking tasks requiring manual die threading

Key specifications

• Thread form: metric external thread
• Nominal size: M14
• Thread pitch: 1.0 mm
• Intended use: manual cutting/repair of external threads on rods and shafts
• Compatibility: fits standard die holders for hand threading
• Material: hardened steel (manufactured for durability in metalworking)

How to use

Secure the workpiece in a vise or appropriate fixture so it cannot rotate. Mount the die into a compatible die holder and align it square to the axis of the rod or shaft. Apply cutting oil to the work area to reduce friction and improve finish. Turn the die into the workpiece with steady, even pressure, backing off periodically to clear chips. Continue until the required thread length is achieved, then remove the die and clean the threaded surface from swarf and oil.

Usage recommendations

Use appropriate personal protective equipment and cutting fluid for better tool life and thread quality. Check die-holder alignment before each use to avoid cross-threading. For rethreading, inspect the component for excessive wear that may require replacement rather than repair.