FANAR left-hand tap M6, metric thread cutting tool N1-111001-0060

FANAR left-hand tap M6 is a precision cutting tool for producing internal metric threads with a left-handed (counterclockwise) orientation. Designed for use in through or blind holes, this M6 tap is suitable for both manual tapping and use in machine tapping setups. It conforms to standard M6 thread dimensions and is intended for applications where reverse-threaded fasteners are required, such as assemblies that unwind under normal rotation or parts that require specific torque direction compatibility.

Advantages

The FANAR left-hand tap M6 offers consistent thread geometry and a robust cutting profile to ensure clean, accurately sized threads. Its design supports reliable chip evacuation and reduced risk of tap breakage when used with appropriate lubrication and correct tapping technique. The tool is suitable for repeated use in production or repair environments and provides compatibility with standard M6 fasteners, reducing the need for additional adjustments or custom hardware.

Suitable for

• Cutting left-hand M6 internal threads in steel, aluminium and other common metals (with appropriate feed and lubricant).
• Tapping through-holes and blind holes in mechanical assemblies.
• Manual tapping with tap wrench or machine tapping in drilling/tapping machines.
• Repairing or replacing reverse-threaded fasteners in automotive and industrial equipment.

Key specifications

• Thread size: M6 (metric)
• Hand: Left-hand (counterclockwise) cutting direction
• Application: Internal threading for through and blind holes
• Compatibility: Standard M6 thread dimensions for use with M6 fasteners
• Typical use: Manual or machine tapping operations

How to use

Secure the workpiece and ensure the hole diameter matches the recommended drill size for M6 internal threads. Apply an appropriate cutting fluid for the workpiece material. Start tapping with steady, controlled rotations in the counterclockwise direction for left-hand threading, advancing the tap and then reversing slightly to break chips if tapping manually. For machine tapping, set the machine to the correct speed and feed for the material and tool size. After threading, clean the hole to remove chips and residual lubricant.

Usage recommendations

Use the FANAR left-hand tap M6 with suitable cutting fluid and proper hole preparation. Select the correct drill pilot size for M6 threads, avoid excessive torque, and use gradual feed or pecking motions in blind holes to prevent chip clogging. Inspect taps regularly for wear and replace damaged tools to maintain thread quality and reduce breakage risk.