Thread Tap FANAR Narzynka M5×0.5 hand tap N1-121001-0051

FANAR Narzynka M5×0.5 hand tap is a manual cutting tool designed to create or restore metric internal threads M5 with a 0.5 mm pitch. Manufactured for general metalworking and assembly tasks, this hand tap is compatible with standard tap handles and holders and is intended for workshop and maintenance use where accurate M5 threads are required.

Advantages

The hand tap provides precise thread cutting for M5×0.5 applications, offering reliable performance in manual threading operations. Its geometry is suitable for cutting or repairing internal threads in a variety of metal materials, and the tool’s dimensions conform to standard M5 specifications so it can be used with commonly available tap handles. The compact design supports controlled hand operation and straightforward positioning in pre-drilled holes.

Suitable for

• Cutting new M5×0.5 internal threads in metal components
• Repairing damaged or worn M5 threads during maintenance
• Manual threading in workshops, assembly lines, and field service work
• Use with standard tap handles and hand-holding fixtures

Key specifications

• Thread form: metric ISO internal thread
• Nominal size: M5
• Pitch: 0.5 mm
• Hand-operated tap type
• Compatibility: standard tap handles and holders

How to use

Drill the hole to the recommended pilot diameter for M5×0.5 threads and secure the workpiece. Mount the hand tap in a suitable tap handle or holder, align it perpendicular to the hole, and apply steady pressure while turning clockwise to cut the thread. Periodically reverse direction to break chips and clear the flutes, and use cutting fluid appropriate for the workpiece material to improve cutting and extend tool life. After threading, back the tap out and clean the newly formed thread of any debris.

Usage recommendations

Use appropriate drilling and tapping speeds for the material being machined, apply suitable cutting or tapping fluid for metalworking, and avoid excessive side loading to prevent tap breakage. For blind holes take care not to bottom out the tap and inspect repaired threads for fit with the corresponding M5 fastener.