Drill bit FANAR HSS cylindrical 5.6 mm for metal, MPN W2-101811-0560

Cylindrical HSS drill bit FANAR, diameter 5.6 mm, designed for drilling metal. Made from high-speed steel to provide wear resistance and maintain hardness at elevated cutting temperatures, this drill bit is suitable for producing clean holes in steel, iron, and common non-hardened metal alloys. The straight cylindrical shank fits most standard chucks on hand drills and drill presses, enabling reliable clamping and consistent concentricity for routine metalworking tasks.

Advantages

The high-speed steel construction delivers a balance of hardness and toughness that resists wear during prolonged use and tolerates the heat generated when cutting metal. The 5.6 mm diameter offers a precise, commonly used hole size for mechanical fittings and preparations for tapping. A cylindrical shank ensures compatibility with typical drill chucks and allows for secure gripping to reduce runout. Designed specifically for metal, the tip geometry and cutting edges are optimized to penetrate steel and similar materials efficiently when used at appropriate speeds and with coolant.

Suitable for

• Drilling holes in mild steel and iron
• Creating pilot holes for tapping or fastening
• General metal fabrication and repair work
• Use with hand drills and drill presses

Key specifications

• Material: High-speed steel (HSS)
• Diameter: 5.6 mm
• Shank type: Cylindrical (straight shank)
• Intended material: Steel, iron and common non-hardened metal alloys
• Suitable machines: Hand drills and drill presses

How to use

Secure the drill bit in the chuck, ensuring the cylindrical shank is clamped evenly to minimize runout. Select an appropriate spindle speed for the workpiece material — lower speeds for harder steels, higher speeds for softer alloys — and apply cutting fluid or coolant to reduce heat and extend tool life. Use steady feed pressure and avoid excessive force; withdraw periodically to clear chips when drilling deeper holes. After use, clean and lightly oil the bit before storage to prevent corrosion.

Usage recommendations

For best results when drilling metal, use the FANAR HSS drill bit with suitable cutting fluid, correct speed, and a firmly mounted workpiece. When preparing threads, consider drilling the recommended drill size for the tap and check hole alignment prior to tapping.