Drill bit FANAR HSS cylindrical 2.2 mm for metal, model W2-103811-0220

FANAR HSS cylindrical drill bit with a 2.2 mm diameter is designed for precise drilling in various metal alloys. Made of high-speed steel (HSS), this small-diameter bit is suitable for use with hand drills and drill presses where accuracy and tool life are required. The cylindrical shank simplifies clamping in standard chucks and allows for stable operation during drilling of thin plates, small components and detailed metalwork.

Advantages

The high-speed steel construction provides wear resistance and consistent cutting performance on ferrous and non-ferrous metals. The 2.2 mm diameter enables precise, small hole creation with minimal burr formation when used at appropriate speeds. The straight cylindrical shank fits common drill chucks and supports secure mounting for both manual and machine drilling operations. The bit is balanced for controlled feed and reduced deflection during light industrial and workshop tasks.

Подходит для

• Сверление тонколистового металла
• Ремонтные и монтажные работы в обслуживании
• Модельные и хобби-проекты по металлу
• Прецизионные операции в легком производстве

Key specifications

• Material: high-speed steel (HSS)
• Diameter: 2.2 mm
• Shank type: cylindrical (straight) shank for standard chucks
• Suitable materials: ferrous and non-ferrous metal alloys
• Typical applications: manual drilling and drill press use

How to use

Secure the drill bit in the chuck ensuring the shank is fully clamped to minimize runout. Select a drilling speed appropriate for the metal being worked — lower speeds for harder alloys, higher speeds for softer metals — and apply steady, moderate feed pressure. Use cutting fluid or lubricant when drilling steel or other hard alloys to reduce heat buildup and extend tool life. Back the bit out periodically when drilling deeper holes to clear chips and maintain cutting efficiency.

Usage recommendations

Use personal protective equipment such as safety glasses and gloves. For best results on thin sheets, clamp the workpiece to prevent vibration. Replace the bit if wear or chipping is observed to maintain hole quality and tool safety.