Drill bit FANAR HSS straight shank 9 mm for metal, model W2-103811-0900

FANAR HSS 9 mm metal drill bit with a straight shank (model W2-103811-0900) is a high-speed steel (HSS) cutting tool designed for drilling through metals and common metal alloys. The cylindrical shank fits standard chucks in hand drills and drill presses, allowing stable rotation and consistent center alignment. The HSS material provides improved wear resistance and higher temperature tolerance during continuous drilling compared with standard carbon steel bits, making it suited to workshop and industrial environments where repeated metal penetration is required.

Advantages

The HSS construction offers greater hardness and heat resistance for sustained cutting performance when drilling ferrous and non-ferrous metals. The straight (cylindrical) shank ensures compatibility with a wide range of drill chucks and provides secure clamping. The 9 mm diameter is suitable for common through-holes and pilot holes, while the fluted geometry facilitates efficient chip evacuation to reduce heat build-up. The bit is suitable for both hand-held and stationary drilling setups.

Suitable for

• Drilling holes in steel, stainless steel, aluminum and other metal alloys
• Through-holes and pilot holes for fastening and assembly
• Use in hand drills, cordless drills and drill presses
• Workshop repairs, fabrication and light industrial production

Key specifications

• Material: high-speed steel (HSS)
• Shank type: straight / cylindrical
• Cutting diameter: 9 mm
• Typical applications: metal drilling, through-holes, pilot holes
• Compatible chuck sizes: standard drill chucks that accept a 9 mm shank

How to use

Secure the drill bit in a properly tightened chuck, ensuring the shank is inserted fully and aligned. Select an appropriate spindle speed and feed rate for the metal being drilled — lower speeds for harder steels and higher speeds for softer metals like aluminum. Use cutting fluid or lubricant when drilling harder alloys or in prolonged operations to reduce friction and extend tool life. Apply steady, moderate pressure without forcing the bit; withdraw occasionally to clear chips and prevent clogging of the flutes.

Usage recommendations

For best results, match drill speed and lubricant to the workpiece material: use slower speeds and cutting oil for hardened steels, and higher speeds with light lubrication for softer non-ferrous metals. Inspect the bit before use and replace if worn or chipped to maintain hole quality and operator safety.