Disc Brush for Drill faster tools 02-9-1105 — 100 mm, brass bristles

Disc Brush for Drill faster tools 02-9-1105 — 100 mm, brass bristles is a circular wire brush designed to be mounted on standard electric drills. With a 100 mm working diameter and brass bristles, the brush is intended for surface cleaning, removal of rust and old paint, light deburring and gentle polishing. The brass filaments reduce the risk of sparking and provide softer contact than steel wire, making the brush appropriate where surface preservation and reduced abrasion are important.

Advantages

The brass-bristle disc delivers controlled material removal and minimizes scratching on softer metals and plated surfaces. Its 100 mm diameter offers a balance between reach and control for handheld drilling operations. The brush is compatible with common drill chucks and can be used at a range of speeds typically supported by standard drills. Construction is focused on secure filament retention to maintain consistent performance during use.

Suitable for

• Cleaning rust and scale from metal parts
• Removing old paint or coatings from small areas
• Deburring edges and smoothing welds on non-hardened metals
• Light polishing and surface preparation before painting or plating
• Maintenance and restoration of fittings, fasteners and hardware

Key specifications

• Brush type: disc / circular wire brush
• Diameter: 100 mm working diameter
• Filament material: brass bristles
• Attachment: suitable for standard drill chucks
• Primary applications: cleaning, rust and paint removal, deburring, light polishing

How to use

Fit the disc brush securely into the drill chuck and tighten according to the drill manufacturer’s instructions. Start at a low speed to establish contact and increase speed as appropriate for the material and task while keeping steady pressure; avoid pressing excessively to prevent premature wear of the bristles and damage to the workpiece. Move the brush across the surface with smooth, overlapping passes and periodically inspect the workpiece and brush condition. Use appropriate personal protective equipment such as safety glasses, gloves and respiratory protection if removing paint or heavy corrosion.

Usage recommendations

For best results, use moderate drill speeds and light to moderate pressure. Do not use on hardened or high-strength steels where aggressive abrasion is required. Store the brush in a dry environment to prevent contamination and deformation of the bristles. Replace the brush when bristles are worn, deformed or missing to maintain safe and effective performance.