Filament Fiberlogy Easy PET-G 1.75 mm 0.85 kg — white

Fiberlogy Easy PET-G 1.75 mm filament in white is a polymer filament designed for FDM/FFF 3D printing. With a net spool weight of 0.85 kg and a nominal diameter of 1.75 mm, this PET-G material aims to combine mechanical strength, chemical resistance and relatively simple printability to produce functional parts, prototypes and durable models. The filament is suitable for printers configured for 1.75 mm feed and is intended for users who need robust, low-warp prints with a smooth surface finish in white.

Advantages

Easy PET-G delivers a balance between toughness and ease of use: it offers better impact resistance and chemical stability than many PLA formulations while remaining easier to print than some high-crystallinity engineering plastics. The material exhibits good layer adhesion, reduced tendency to warp compared with large ABS parts, and produces consistent extrusion at typical PET-G temperatures. White color provides a neutral base for post-processing, painting or functional parts where visual integration matters.

Suitable for

• Functional prototypes and mechanical components
• Durable household items and fixtures
• Parts requiring chemical resistance and low moisture sensitivity
• Models that need a smooth white surface for finishing or painting

Key specifications

• Material: PET-G (glycol-modified polyethylene terephthalate)
• Diameter: 1.75 mm nominal
• Net filament weight: 0.85 kg
• Color: white
• Form: filament for FDM/FFF 3D printers
• Compatibility: printers with 1.75 mm filament feed

How to use

Load the 1.75 mm Fiberlogy Easy PET-G filament into a compatible FDM/FFF 3D printer following the printer manufacturer’s instructions. Select a print temperature appropriate for PET-G (refer to your printer or filament guidelines) and set a heated bed temperature to reduce warping. Use moderate print speeds and ensure proper first-layer adhesion by adjusting bed leveling and initial layer settings. Dry the filament if it has absorbed moisture before printing for optimal surface quality and mechanical properties.

Usage recommendations

For best results, print with a well-tuned extrusion multiplier and moderate cooling; if stringing occurs, slightly lower the print temperature or optimize retraction settings. Store the spool in a dry environment or sealed container with desiccant to preserve filament quality. When post-processing, white PET-G accepts sanding and painting after appropriate surface preparation.