3D printing filament Fiberlogy Easy PET-G Yellow 1.75 mm 850 g

Fiberlogy Easy PET-G Yellow 1.75 mm 850 g is a PET-G 3D printing filament in a vivid yellow color, supplied on an 850 g spool and designed for use with standard 1.75 mm extruders. PET-G combines higher impact strength and improved chemical resistance compared with PLA while being easier to print than many engineering plastics. This filament is intended for producing functional parts, durable prototypes and visual models where a balance of mechanical performance and printability is required.

Advantages

Easy PET-G offers good layer adhesion and reduced risk of warping compared to materials like ABS, while maintaining superior toughness and flexibility relative to PLA. The material provides reliable extrusion behavior on printers configured for PET-G, allowing consistent dimensional accuracy and surface finish. The yellow pigmentation delivers solid color coverage for visible parts without the need for painting in many applications.

Suitable for

• Functional prototypes and mechanical parts
• End-use components requiring impact resistance
• Visual models and presentation pieces
• Outdoor and indoor parts with moderate chemical exposure

Key specifications

• Material: PET-G (glycol-modified polyethylene terephthalate)
• Filament diameter: 1.75 mm
• Spool weight: 850 g delivered filament
• Color: Yellow
• Compatibility: for FDM/FFF printers accepting 1.75 mm filament and PET-G settings

How to use

Load the 1.75 mm filament into an FDM/FFF 3D printer configured for PET-G printing parameters. Set nozzle temperature, print bed temperature and print speed according to manufacturer recommendations for PET-G and the specific printer model; typical nozzle temperatures fall between PLA and ABS. Ensure good first-layer adhesion by using a clean build surface and appropriate bed leveling. Monitor initial layers and fine-tune retraction and cooling settings to reduce stringing and improve surface quality.

Usage recommendations

For best results, print with moderate cooling and adjust retraction to minimize stringing; use a heated bed and an adhesive or textured surface if needed for reliable adhesion. Store the filament in a dry environment or sealed container with desiccant to preserve printability.