A curated selection of maximum value offers!
In cart {{totalProductsCount}} item(s)
Your cart is empty
3D printing filament Fiberlogy PLA Mineral 1.75 mm 0.85 kg spool
Fiberlogy PLA Mineral 1.75 mm on a 0.85 kg spool is a polylactic acid (PLA) filament formulated for general-purpose FDM/FFF 3D printing. The filament offers the typical ease of printing and dimensional stability of PLA, producing models and decorative parts with good surface finish and reliable layer adhesion. Supplied in a 1.75 mm diameter, the spool weight of 0.85 kg provides a balance between material quantity and compact storage for desktop printers and small workshops.
Fiberlogy PLA Mineral combines straightforward printability with consistent extrusion behavior, which reduces the need for frequent parameter adjustments. The material delivers good dimensional accuracy and stable layer bonding, making it suitable for detailed prototypes and visually oriented prints. Its formulation supports smooth surfaces and predictable warping performance typical for PLA-based filaments.
Load the 1.75 mm filament into a compatible FDM/FFF printer following the printer manufacturer's filament loading procedure. Use standard PLA print settings as a starting point: nozzle temperatures commonly in the 190–220°C range and bed temperatures from 0–60°C depending on adhesion method. Print speeds and cooling should be adjusted for part detail and surface finish; enable part cooling for better overhang performance and finer details. Store the spool in a dry environment or sealed container with desiccant when not in use to maintain consistent print quality.
For best results, calibrate extrusion multiplier and first-layer height for your specific printer and nozzle. If warping is observed on larger prints, use a heated bed set to moderate PLA temperatures or apply adhesion aids such as glue stick, blue tape, or a textured build surface. Avoid prolonged exposure to high humidity to prevent filament brittleness and extrusion issues.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}