3D printing filament Fiberlogy Impact PLA 1.75 mm 0.85 kg — White

Fiberlogy Impact PLA 1.75 mm is a white 3D printing filament presented on a 0.85 kg spool and designed for FDM/FFF desktop printers. This PLA formulation focuses on improved impact resistance compared with standard PLA while preserving easy printability, low warping and compatibility with common print settings. It is intended for users who need tougher parts without changing hardware or adopting specialty high-temperature materials.

Advantages

The filament combines the dimensional stability and surface finish typical of PLA with modified mechanical properties to increase toughness and resistance to sudden forces. Its 1.75 mm diameter ensures consistent feeding on most hobby and professional extruders, and the 0.85 kg spool reduces the need for frequent replacement. The white color provides a neutral base that is easy to post-process, paint or dye.

Suitable for

• Prototyping functional parts that require higher impact resistance
• Consumer items and housings exposed to occasional shocks
• Hobby models and functional prints where ease of printing and toughness are both important
• Educational and workshop projects using standard FDM/FFF printers

Key specifications

• Material type: PLA with enhanced impact resistance
• Nominal diameter: 1.75 mm
• Spool weight: 0.85 kg
• Filament color: White
• Printing technology: FDM / FFF

How to use

Load the 1.75 mm filament into a compatible FDM/FFF printer according to the printer manufacturer's instructions. Typical printing temperatures for Impact PLA are similar to standard PLA; start with common PLA settings and adjust the extruder temperature, print speed and cooling to optimize layer adhesion and surface quality. Use a clean, level build plate and standard adhesion methods such as a heated bed (if available), glue stick, painter's tape or PEI sheet depending on your setup. Allow printed parts to cool before removal to preserve dimensional accuracy.

Usage recommendations

For best results, begin with standard PLA print profiles and perform small test prints to fine-tune temperature and cooling. Increase layer adhesion by slightly raising nozzle temperature if parts show layer separation under impact. Store unused filament in a dry, sealed container with desiccant to maintain printing consistency.