Screw & wall plug kit Fischer 535464

The Fischer 535464 screw and wall plug kit contains 50 DuoPower plugs and matching panhead screws designed for secure fastening in brick, concrete and plasterboard. Each plug is 40 mm long and requires an 8 mm drill hole with a minimum drill depth of 60 mm. The kit uses a two-component design (grey and red parts) that activates different anchoring functions—expansion, folding or knotting—depending on the substrate to provide high load values and reliable fixing performance.

Advantages

The two-component construction automatically adapts to the material so the grey nylon part triggers the optimal function while the red expansion wings enhance the secure anchoring. A preshaped narrow rim on the plug head prevents the plug from sliding into the drill hole, and serrated anti-rotation ribs stop the plug turning during installation. The design gives clear tactile feedback during insertion, enabling correct tightening of the screw without over-tightening. Panhead screws included are matched to the DuoPower plugs.

Suitable for

• Brick and solid masonry
• Concrete
• Plasterboard and wall panels
• General DIY and light construction fastening

Key specifications

• Brand: FISCHER
• Model / MPN: 535464
• EAN: 4048962239935
• Contents: 50 pieces (DuoPower plugs + panhead screws)
• Plug length: 40 mm
• Drill diameter: 8 mm
• Minimum drill hole depth: 60 mm
• Material: two-component plug (grey high-quality nylon + red expansion wings)

How to use

Drill an 8 mm hole to at least 60 mm depth in the chosen substrate, remove dust from the hole, insert the DuoPower plug flush with the surface using the narrow rim as a guide, then drive the supplied panhead screw until you feel the plug engage and tighten securely. Tighten until the plug closes around the screw and holds firm; avoid excessive torque once the tactile feedback indicates correct seating.

Usage recommendations

Use the Fischer DuoPower 535464 for a wide range of indoor fastening tasks in brick, concrete and plasterboard. Select an 8 mm drill bit and maintain the minimum hole depth of 60 mm. For heavy loads or critical applications consult relevant load tables or a structural specialist to confirm suitability.