Screw & wall plug kit Fischer 557927

The Fischer 557927 screw & wall plug kit contains four 40 mm screws with a Pozidriv PZ2 drive and matching plugs designed for secure anchor installation. Packaged in a blister, the kit is intended for use with 8 mm drill holes and requires a minimum anchor depth of 50 mm. The set is suitable for mounting fixtures in a range of building materials where a compact, reliable fixing is required.

Advantages

This kit provides a complete pairing of screws and plugs for consistent load transfer and reduced installation time. The Pozidriv PZ2 drive offers improved bit engagement to reduce cam-out during tightening. The 40 mm screw length and corresponding plug geometry are matched to provide dependable anchoring performance in drilled holes with an 8 mm diameter and the specified embedment depth.

Подходит для

• Крепление лёгких и средних навесных элементов в пустотелых и полнотелых материалах
• Монтаж полок, кронштейнов и светильников
• Работы по ремонту и быту, мелкий монтаж в квартирах и гаражах

Key specifications

• Screw length: 40 mm
• Drive type: Pozidriv PZ2
• Recommended drill hole diameter: 8 mm
• Minimum embedment depth: 50 mm
• Quantity: 4 pieces per blister pack

How to use

Drill an 8 mm diameter hole to at least 50 mm depth in the chosen base material, then clean the hole of dust and debris. Insert the wall plug flush with the surface, position the fixture, and drive the 40 mm Pozidriv PZ2 screw through the fixture into the plug until the fixture is held firmly. Avoid over-torquing to prevent damaging the plug or the base material; use a hand or powered screwdriver with a PZ2 bit for controlled installation.

Usage recommendations

Verify the base material suitability and load requirements before installation. For hollow or weak substrates, use appropriate hollow-wall anchors or additional reinforcement. When installing heavy items or when in doubt about load capacity, consult relevant load tables or a professional to select a more suitable fastening system.