Screw & wall plug kit Fischer 568122 10 pcs Nylon 8 mm drill hole

The Fischer 568122 screw & wall plug kit includes 10 nylon SX Plus expansion plugs with matching screws for an 8 mm drill hole. Designed for solid and perforated building materials such as concrete, brick, aerated concrete and masonry, the kit provides reliable anchoring performance with a minimum drill hole depth of 50 mm and corrosion-resistant steel screws matched to the plug length.

Advantages

Four-way expansion of the SX Plus plug ensures efficient force transmission into the building material and high holding values in both solid and perforated substrates. Special fixing wings pre-fix the screw in the plug so the screw stays in place during setting, which is useful for overhead work. An expansion-free plug neck prevents surface stresses while screwing in, reducing the risk of damage to tiles or plaster. The plug’s shaped body allows easy insertion into the drilled hole with a few light hammer blows, and a pronounced edge prevents the plug from slipping deeper into the hole. The clearly noticeable tightening torque signals correct installation and helps avoid overtightening.

Suitable for

• Concrete and masonry (solid building materials)
• Sand-lime brick and aerated concrete
• Gypsum fibre board and lightweight blocks (where anchor type is applicable)
• Indoor and outdoor general fixings with 8 mm drill hole

Key specifications

• Brand: FISCHER
• MPN: 568122
• EAN: 4048962484359
• Contents: 10 nylon SX Plus plugs with matching screws
• Plug diameter / drill hole: 8 mm
• Minimum drill hole depth: 50 mm
• Material: high-quality nylon plug, steel screws

How to use

Drill an 8 mm hole to the minimum depth of 50 mm, clean the hole of dust, insert the SX Plus plug so that the pronounced edge sits flush with the surface, and then drive the matched screw into the plug. For pre-positioned installation, push the plug into the hole and engage the screw; for push-through installation, insert the screw together with the fixture. As the screw is tightened, the plug expands in four directions and anchors in the substrate. The fixing wings fold inward when the screw is inserted to hold the screw during setting, and the anti-rotation lock prevents twisting while installing.

Usage recommendations

Use the plug with the screw lengths recommended for the plug length plus fixture thickness and screw diameter; verify substrate suitability and choose appropriate screw type (wood, chipboard or stud screw) for the specific application. Avoid using the plug in highly cracked or unstable material without additional assessment.