FISCHER Anchor Fischer HybridPower 10x90 FUS 577390 — anchor for masonry and concrete, 10×90 mm

The FISCHER Anchor HybridPower 10x90 FUS is a mechanical expansion anchor engineered for secure load-bearing fixings in concrete and masonry. With a 10×90 mm size, this anchor is designed to fasten structural elements, rails, brackets and heavy fixtures. The HybridPower design combines reliable expansion mechanics with a sleeve that adapts to both solid and hollow substrates, delivering consistent performance when installed with standard drills and torque tools.

Advantages

The anchor provides high pull-out resistance and secure expansion in a variety of base materials, reducing the need for multiple anchor types on site. Its geometry ensures stable clamping force and minimized movement after installation. Installation is straightforward and compatible with commonly used drill bit diameters and torque settings, which helps maintain consistent results across repetitive fixings. Corrosion-resistant material options extend service life in typical indoor and sheltered outdoor applications.

Suitable for

• Anchoring rails and support systems to concrete or solid masonry
• Mounting brackets and heavy fixtures in buildings
• Fixing structural elements where high pull-out resistance is required
• Applications in hollow or perforated masonry where reliable expansion is needed

Key specifications

• Nominal size: 10×90 mm (diameter × length)
• Anchor type: mechanical expansion anchor with sleeve
• Suitable base materials: concrete and masonry (solid and hollow)
• Installation method: drilled hole with expansion by tightening
• Tool compatibility: standard drill and torque wrench/screwdriver
• Performance: designed for high pull-out resistance and secure clamping

How to use

Drill a hole of the correct diameter and depth for a 10×90 mm anchor, ensuring the hole is clean and free of dust. Insert the anchor into the hole until the sleeve sits flush with the substrate surface. Place the fixture over the anchor and tighten the bolt or screw to the recommended torque; this causes the anchor sleeve to expand and form a secure hold in the base material. Check the tightening torque and alignment of the fixture after installation to confirm a proper fit.

Usage recommendations

Confirm substrate suitability and load requirements before selection; use a drill bit appropriate for concrete or masonry and remove debris from the hole to ensure full expansion. For critical or structural applications, follow local codes and engineering specifications, and consider additional anchors or specialist consultation for maximum safety. Store anchors in a dry environment to preserve material properties.