FISCHER Anchor Fischer HybridPower 10x90 T 577391 — steel fixing element

FISCHER Anchor HybridPower 10x90 T is a steel fixing element designed for mechanical anchoring in construction and installation work. With a 10 x 90 mm size and a T-head design, this anchor is intended for use in solid substrates where a robust, load-bearing connection is required. The product is suitable for securing fixtures that demand reliable transfer of shear and tensile loads and is compatible with standard installation tools for steel anchors.

Advantages

The HybridPower anchor combines a solid steel body with an engineered geometry to provide consistent embedment and grip in concrete and other solid materials. Its T-head allows for secure seating of mounted components and helps prevent rotation during tightening. The anchor’s dimensions and construction are optimized for predictable mechanical behavior under load, facilitating planning and installation in structural and non-structural applications.

Suitable for

• Anchoring rails, brackets and supports to concrete or solid masonry
• Securing fixtures in structural and installation work where steel anchors are specified
• Applications requiring shear and tensile load transfer in solid substrates

Key specifications

• Material: steel
• Size: 10 x 90 mm (diameter × length)
• Head type: T-head for secure seating
• Designed use: mechanical anchoring in solid substrates (e.g., concrete, solid masonry)
• Load behavior: suitable for shear and tensile loads when installed according to guidelines

How to use

Drill a hole in the substrate with the recommended diameter and depth for a 10 mm anchor, ensuring the hole is clean and free of dust. Insert the steel anchor until the T-head is seated against the fixture, then tighten using the appropriate torque specified by the anchor installation guidelines. Verify embedment depth and alignment before final tightening. Follow standard installation practices for mechanical anchors to achieve the intended load capacity and safety.

Usage recommendations

Use the anchor only in appropriate solid substrates; avoid use in hollow or weak materials unless specifically approved. Check the substrate condition, drilling depth and torque values before installation. For load-critical or safety-related applications, follow applicable design standards and, if necessary, consult technical documentation or a structural engineer to confirm suitability.