Screw & anchor kit Fischer 84334 15 pcs 60 mm for concrete brick

The Fischer 84334 screw & anchor kit contains 15 anchors with a length of 60 mm designed for secure fixings in autoclaved aerated concrete, brick and concrete. Each anchor combines metal and plastic components to provide reliable load transfer and corrosion resistance where appropriate. The kit is suitable for common indoor and outdoor fastening tasks that require a 6 mm drill hole and a minimum embedment depth of 75 mm.

Advantages

The combination of metal and plastic in each anchor gives a balance of strength and flexibility to adapt to different substrate densities. The standardized 60 mm length and 6 mm hole diameter make the kit compatible with common drills and installation tools. Supplied as a set of 15, the kit is convenient for multiple small to medium jobs without the need to buy individual anchors.

Suitable for

• Fixing light to medium-weight fixtures to autoclaved aerated concrete
• Securing fittings and brackets in brickwork
• Anchoring into solid concrete for non-structural attachments
• General maintenance and renovation tasks requiring 6 mm anchors

When it may not be suitable

This kit is not intended for heavy structural loads or situations that require high-load chemical anchors or through-bolts. It is also not suitable where the required drill diameter differs from 6 mm or where embedment depths below 75 mm are not achievable.

Key specifications

• Quantity: 15 pieces
• Anchor length: 60 mm
• Required drill hole diameter: 6 mm
• Minimum embedment depth: 75 mm
• Materials: metal and plastic components
• Intended substrates: autoclaved aerated concrete, brick, concrete

How to use

Drill a hole with a 6 mm diameter to at least 75 mm depth, ensuring the hole is clean and free of dust. Insert the anchor into the hole until the flange sits flush with the surface, then drive or screw the appropriate screw or nail into the metal part of the anchor until the fixture is held securely. Check the manufacturer guidance for recommended screw types and maximum loads for the chosen substrate.

What to consider before purchase

• Confirm the substrate type is autoclaved aerated concrete, brick, or concrete.
• Ensure your drill accepts a 6 mm drill bit and you can reach a 75 mm depth.
• Verify the expected load and whether a higher-capacity anchor is required for heavier fixtures.

Usage recommendations

Use appropriate personal protective equipment when drilling and installing anchors. For critical or high-load applications, perform a test installation and consult structural guidance or a specialist to confirm suitability.