Diamond cutting wheel Flex DISTAR DIAMOND CROWN RS-TX 1 1/4" 132mm x 300mm DRY

Flex DISTAR DIAMOND CROWN RS-TX 1 1/4" 132mm x 300mm DRY is a diamond cutting wheel designed for dry cutting operations on hard construction materials. With a 132 mm diameter, 300 mm segment length and 1 1/4" bore, this blade fits compatible saws requiring these dimensions and is intended for tasks that need a diamond-segment blade for precise, efficient cuts without coolant.

Advantages

The diamond segments provide high wear resistance and maintain cutting performance during repeated dry cuts. The wheel construction balances precision and durability, reducing vibration and enabling straight, accurate cuts in dense materials. The standardized 1 1/4" bore and common diameter make the blade compatible with a range of professional saws designed for diamond cutting wheels.

Suitable for

• Dry cutting of reinforced concrete
• Cutting dense masonry and natural stone
• Construction and renovation on sites where wet cooling is not feasible
• Use with compatible handheld and ride-on saws specified for 132 mm diameter and 1 1/4" bore

When it may not be suitable

This diamond cutting wheel is intended for dry cutting and therefore may not be suitable where wet cutting is explicitly required to reduce dust or control heat. It may also be inappropriate for very soft materials where a continuous rim or a blade designed for tile/glass would yield better edge finish.

Key specifications

• Diameter: 132 mm
• Segment length: 300 mm
• Bore size: 1 1/4" (34.925 mm)
• Intended use: Dry cutting
• Blade type: Diamond segmented cutting wheel

How to use

Mount the Flex DISTAR DIAMOND CROWN RS-TX on a compatible saw with a matching 1 1/4" bore and rated for a 132 mm diameter blade. Follow the saw manufacturer's instructions for safe installation, checking flange compatibility and tightening to the recommended torque. Operate the saw at the specified maximum RPM for the blade and perform steady, controlled cuts without applying excessive force. Ensure the machine's guards are in place and that you use appropriate dust extraction or PPE for dry cutting environments.

What to consider before purchase

• Verify your saw accepts a 132 mm diameter blade with a 1 1/4" bore.
• Confirm dry cutting is appropriate for the materials and site dust regulations.
• Check the saw's maximum RPM and compatibility with segmented diamond blades.

Usage recommendations

For best results, use the blade on materials matching its design purpose (concrete, masonry, stone), maintain steady feed rates, and use mechanical dust extraction where possible. Replace the blade when cutting performance or segment wear noticeably deteriorates.