Polishing Disc Flex PSX‑G Extra Coarse 80 mm, 2‑pack

Flex PSX‑G Extra Coarse polishing discs, 80 mm diameter, 2‑pack, are abrasive pads designed for aggressive material removal and initial surface preparation. These 80 mm discs fit compatible backing pads and are intended for use with rotary and dual‑action polishers where fast cut and rapid shaping are required. The discs are suitable for removing heavy oxidation, paint defects, overspray and for leveling metal or painted surfaces prior to finer finishing steps.

Advantages

The discs provide high cutting performance and fast stock removal while maintaining consistent abrasive action across the surface. Their extra coarse grit ensures efficient reduction of heavy defects and oxidation without the need for multiple passes. Delivered as a two‑pack, they offer immediate replacement options during extended jobs and help maintain workflow continuity on restoration or bodywork tasks.

Suitable for

• Removing heavy oxidation and rust scale from painted or bare metal surfaces
• Eliminating severe paint defects, overspray and thick contaminants
• Rapid shaping, leveling and initial material removal on body panels
• Preparing substrates for subsequent finer sanding and polishing steps

Key specifications

• Diameter: 80 mm
• Abrasion grade: extra coarse
• Pack quantity: 2 discs
• Compatibility: designed for use with matching backing pads on rotary and dual‑action polishers
• Primary use: aggressive stock removal and initial surface preparation

How to use

Attach the disc securely to a compatible backing pad and ensure the pad is correctly centered on the polisher. Start the tool at low speed to check balance, then increase to the recommended working speed for aggressive cutting. Work with moderate, even pressure and keep the disc moving to avoid creating heat spots or uneven removal. Inspect the surface frequently and switch to finer abrasives when the desired contour or defect reduction is achieved. Replace discs when abrasive performance diminishes.

Usage recommendations

Use appropriate personal protective equipment, including eye and respiratory protection, and work in a well‑ventilated area. Test on a small, inconspicuous area before full application to verify compatibility with the substrate and the desired removal rate. Avoid excessive dwell time in one spot to prevent substrate damage.