Screwdriver Bit TORX T20 30 mm L, Forsage — 1/4" drive

Forsage TORX screwdriver bit T20 with a 30 mm shank and a 1/4" (6.35 mm) drive interface is designed for use with TORX T20 fasteners. The bit is made of steel and fits standard 1/4" bit holders, manual screwdrivers with interchangeable bits, and power drivers or impact drivers that accept 1/4" hex shanks. Its 30 mm length provides reach in recessed or partially obstructed screw locations while maintaining control for assembly and repair tasks.

Advantages

The bit offers precise engagement with TORX T20 heads to reduce cam-out and wear. Its 1/4" hex drive ensures wide compatibility with bit holders and drivers commonly used in professional and home tool kits. The 30 mm shank length balances accessibility and stiffness, allowing effective torque transfer for fastening and loosening operations.

Suitable for

• Assembly of furniture and fixtures that use TORX T20 fasteners
• Maintenance and repair of electronics and appliances with T20 screws
• Automotive trim and interior work where T20 TORX is specified
• General fastening tasks with power drivers or manual bit holders

Key specifications

• Bit type: TORX T20
• Shank length: 30 mm
• Drive interface: 1/4" (6.35 mm) hex
• Material: steel

How to use

Insert the 1/4" hex shank into a compatible bit holder, screwdriver handle, or power driver with a 1/4" chuck. Align the TORX T20 tip with the screw head and apply steady axial pressure while turning to engage the fastener. For power tools, use controlled speed and torque settings appropriate for the screw and the work material to avoid stripping. After use, store the bit in a holder or case to protect the tip.

Usage recommendations

Use the bit with appropriate torque settings and correct seating of the TORX tip in the screw recess to prevent cam-out and tip damage. Avoid using a worn or badly deformed bit on critical fasteners; replace if tip wear is observed.