Grinding flap disc Forsage 150x22.2 mm P36 for angle grinder, abrasive flap wheel

Forsage 150x22.2 mm P36 grinding flap disc is an abrasive lamellar wheel designed for angle grinders with a 22.2 mm bore. Engineered for aggressive material removal and surface blending, this flap disc is intended for work on metal and other hard substrates. The P36 grit provides a coarse cut suitable for deburring, removing weld splatter, eliminating rust and old paint, and performing initial shaping in fabrication and repair tasks.

Advantages

The flap disc combines multiple overlapping abrasive flaps that wear evenly to expose fresh abrasive, extending usable life compared with single-layer wheels. Its coarse P36 grit ensures fast stock removal while maintaining a controlled finish, reducing the number of passes required. The 150 mm diameter gives a balanced working surface for both edge and flat area contact, and the standard 22.2 mm bore fits most common angle grinders, enabling straightforward mounting and stable operation.

Suitable for

• Deburring and edge blending on steel parts
• Weld seam cleaning and smoothing
• Rust and old paint removal from metal surfaces
• Rough shaping and stock removal during fabrication

Key specifications

• Diameter: 150 mm
• Bore size: 22.2 mm
• Abrasive grit: P36 (coarse)
• Type: Lamellar (flap) grinding disc
• Compatibility: Angle grinders with matching bore and mounting system

How to use

Mount the flap disc securely on an angle grinder that accepts a 22.2 mm bore. Before operation, inspect the disc for damage and wear appropriate personal protective equipment including eye protection, gloves, and respiratory protection as needed. Start the grinder and bring the disc to operating speed, then apply it to the workpiece with steady, even pressure, moving across the surface to avoid gouging. For best results, keep the angle grinder at a moderate angle to the surface and allow the flaps to wear evenly; avoid excessive pressure that can overheat the disc or the workpiece.

Usage recommendations

Use the P36 flap disc for initial heavy stock removal and aggressive cleaning; switch to finer grit discs for final finishing. Maintain consistent speed and pressure, and replace the disc when abrasive effectiveness declines or when structural damage is observed.