Pneumatic fitting Forsage F-MH04/06K external thread 1/4" jodełka 10 mm set of 5

Pneumatic fitting Forsage F-MH04/06K external thread 1/4" jodełka 10 mm set of 5 is a threaded connector designed for joining flexible pneumatic tubing to standard 1/4" female ports. Supplied as a set of five identical fittings, each piece combines a 1/4" external thread with a 10 mm barbed (jodełka) tail to secure hose or tube for compressed air distribution and pneumatic tool connections. The fitting is intended for routine workshop maintenance, system extensions and repair of air lines where a compact, threaded-to-barbed transition is required.

Advantages

The fitting provides a reliable mechanical connection between threaded ports and 10 mm flexible tubing without the need for specialized crimping tools. Its external 1/4" thread ensures compatibility with common pneumatic ports and adapters, while the barbed tail helps retain hose under moderate pressure when used with a clamp. Supplied as a set of five, it supports small installation or repair jobs and reduces the need for repeated single-item orders. The simple design makes mounting and replacement fast and repeatable in workshop environments.

Suitable for

• Connecting 10 mm polyurethane, PVC or rubber pneumatic tubing to 1/4" threaded ports
• Workshop maintenance and pneumatic tool hookups
• Compressed air distribution manifolds and branch lines
• Repair and replacement of worn or damaged fittings in air systems
• Small-scale pneumatic installations and prototypes

Key specifications

• Connection A: external (male) 1/4" thread for standard pneumatic ports
• Connection B: 10 mm barbed (jodełka) tail for flexible tubing
• Pack quantity: 5 identical fittings
• Typical application: compressed air and pneumatic systems
• Installation: thread-mounted on ports and hose secured with a clamp

How to use

Ensure the mating port has a clean and matching 1/4" female thread. Apply appropriate thread sealant or tape if required by the system, then screw the fitting into the port until hand-tight plus a partial turn with a wrench as needed, taking care not to overtighten. Slide the 10 mm inner-diameter tubing fully over the barbed tail and secure with a hose clamp or crimp sleeve for reliable retention under pressure. Check connections for leaks after pressurising the system and retighten clamps or fittings if necessary.

Usage recommendations

Use compatible tubing materials (PU, PVC or rubber) with a 10 mm internal diameter and select an appropriate clamp to match operating pressure. Avoid excessive tightening of the threaded connection to prevent thread damage. Inspect fittings periodically for wear or corrosion and replace any components showing degradation to maintain safe pneumatic operation.