Spray Gun Forsage F-S-770S with 1000 ml Metal Bottom Cup, 1.8 mm Nozzle

Forsage F-S-770S with a 1000 ml metal bottom cup and a 1.8 mm nozzle is a professional gravity-fed spray gun designed for applying paints, lacquers and primers. The metal reservoir is mounted under the gun for continuous material feed and reduced tipping, while the 1.8 mm nozzle size accommodates medium- to high-viscosity coatings used in repair, restoration and touch-up tasks. The tool delivers a controlled spray pattern and consistent atomization suitable for tasks that require even layers and precise coverage.

Advantages

The all-metal 1000 ml cup provides durability and easy cleaning, while the bottom-mounted design improves balance and lowers the center of gravity for steady handling during extended use. The 1.8 mm nozzle offers a compromise between flow rate and fineness of atomization, allowing efficient application of primers, lacquers and thicker paints. Adjustable air and fluid controls enable fine tuning of the spray pattern and material output for different coatings and working conditions.

Suitable for

• Automotive refinishing and spot repair
• Furniture restoration and finishing
• Industrial touch-ups and small production runs
• Applying primers and medium-thickness paints

Key specifications

• Nozzle diameter: 1.8 mm for medium to thicker coatings
• Cup capacity: 1000 ml metal bottom-mounted reservoir
• Feed type: gravity/pressurized feed from bottom cup
• Construction: metal body and metal cup for increased durability
• Controls: adjustable air and fluid valves for spray pattern and material flow

How to use

Fill the metal 1000 ml cup with the chosen paint, lacquer or primer, ensuring the material is properly filtered and mixed according to manufacturer recommendations. Connect the spray gun to a regulated compressed air source and set initial air pressure appropriate for a 1.8 mm nozzle and the selected coating. Start with conservative fluid and air settings, test spray on a cardboard or scrap surface, then gradually adjust the fluid and air controls to achieve the desired atomization and fan width. Maintain a consistent distance and speed when spraying to obtain even coverage.

Usage recommendations

Use compatible thinning agents and follow coating manufacturer guidance for viscosity and flash-off times. Clean the metal cup, nozzle and internal passages after each use to prevent clogging and corrosion. When working with solvent-based materials, ensure adequate ventilation and use appropriate personal protective equipment such as respirators and gloves.