G_B_FISSAGGI CBAMD22 Wire Mesh Sleeve 22x1000 mm

The G_B_FISSAGGI CBAMD22 wire mesh sleeve is a professional-grade anchoring component engineered for use with chemical anchors in hollow masonry, perforated bricks, and blocks. Measuring 22 mm in diameter and 1000 mm in length, this metal sleeve is designed to provide structural integrity by containing the resin within the cavity, ensuring it forms a secure bond with the surrounding material. By preventing the resin from flowing away into internal voids, the sleeve guarantees a reliable and stable installation for various heavy-duty fixings.

Advantages

The primary benefit of this wire mesh sleeve is its ability to optimize resin consumption while maximizing the strength of the chemical anchor. Its robust metal construction maintains its shape during insertion, allowing for precise resin distribution even in irregular hollow spaces. This component is essential for achieving consistent results in professional construction projects, as it bridges the gap between the anchor rod and the hollow wall structure, effectively creating a solid anchor point where traditional methods might fail.

Suitable for

• Securing heavy loads in hollow bricks
• Installing fixtures in perforated masonry
• Reinforcing chemical anchors in hollow wall cavities
• Professional construction and renovation projects

When it may not be suitable

This wire mesh sleeve is not intended for use in solid materials such as dense concrete or solid stone, where a chemical anchor can be injected directly into the drilled hole without the need for a containment sleeve. It is also not suitable for applications requiring high-temperature resistance beyond the specifications of the chemical resin used.

Key specifications

• Material: Metal
• Diameter: 22 mm
• Length: 1000 mm
• Compatibility: Chemical anchors

How to use

To use the sleeve, first drill a hole of the appropriate diameter into the masonry. Insert the wire mesh sleeve into the hole, ensuring it fits snugly. If the required depth is less than 1000 mm, the sleeve can be cut to the desired length. Inject the chemical resin into the sleeve starting from the bottom, ensuring the sleeve is filled completely to prevent air pockets. Once filled, insert the anchor rod or stud into the sleeve, rotating it slightly to ensure even resin distribution, and allow the resin to cure according to the manufacturer's instructions before applying any load.

What to consider before purchase

• Verify the diameter of the hole matches the 22 mm sleeve size
• Ensure the length is sufficient for your specific wall thickness
• Check compatibility with your chosen chemical resin system

Usage recommendations: Always wear appropriate personal protective equipment when handling chemical resins and ensure the hole is thoroughly cleaned of dust and debris before inserting the sleeve to achieve the best possible bond.