The G&B Fissaggi HTVE08 blanking sleeve is a professional-grade anchoring component specifically engineered for use in hollow materials. Measuring 10 mm in diameter and 100 mm in length, this nylon sleeve is designed to work in conjunction with chemical mortars to create secure and durable fixings in substrates such as hollow bricks and blocks. By controlling the distribution of the chemical resin, the sleeve prevents leakage into the hollow cavities of the material, ensuring that the anchor point is solid and capable of supporting intended loads.
Advantages
The primary advantage of using this nylon blanking sleeve is its ability to optimize the performance of chemical anchors in challenging hollow substrates. It acts as a containment barrier, ensuring that the resin is concentrated exactly where it is needed to form a strong bond with the internal structure of the brick. This results in a significantly more reliable installation compared to using chemical mortar alone. The durable nylon construction provides excellent resistance to environmental factors, ensuring long-term stability for your fasteners in various construction and renovation applications.
Suitable for
- Securing fixtures into hollow bricks
- Installing hardware into hollow blocks
- Construction and renovation projects requiring chemical anchoring
- Professional masonry and installation tasks
When it may not be suitable
This blanking sleeve is specifically designed for hollow materials and is not intended for use in solid concrete or dense stone, where a sleeve is typically unnecessary and may interfere with the bonding process. It should also not be used in applications requiring fire-rated installations unless specifically certified for such use.
Key specifications
- Material: Nylon
- Diameter: 10 mm
- Length: 100 mm
- Quantity: 50 pieces
How to use
To use the G&B Fissaggi blanking sleeve, first drill a hole into the hollow material according to the diameter required by the sleeve. Clean the hole thoroughly to remove any dust or debris, as this is critical for the chemical mortar to bond correctly. Insert the sleeve fully into the hole. Inject the chemical mortar into the sleeve starting from the bottom, ensuring it is filled sufficiently to allow the fastener to be inserted. Once the mortar is injected, insert the threaded rod or fastener into the sleeve and allow the resin to cure according to the manufacturer's instructions before applying any load.
What to consider before purchase
- Verify the diameter of your drill bit matches the required hole size for the 10 mm sleeve.
- Ensure the depth of the hollow material is sufficient to accommodate the 100 mm length.
- Check that your chemical mortar is compatible with nylon sleeves.
- Confirm the quantity of 50 pieces meets the requirements of your specific project.
Usage recommendations
Always wear appropriate personal protective equipment when drilling into masonry and handling chemical mortars. Ensure the hole is completely free of dust to maximize the load-bearing capacity of the anchor.
